A New Approach to the Computation of Reduced Order Circuit Models of Rc Circuits
نویسندگان
چکیده
A new method for the computation of a reduced order circuit model, based on numerical elimination of the internal circuit nodes, is presented. The circuit passivity is preserved unlike the majority of other approaches. A 1033 node RC circuit is reduced to an admittance with one pole and two zeros for a frequency range of three decades.
منابع مشابه
Stage specialization for design and analysis of flotation circuits
This paper presents a new approach for flotation circuit design. Initially, it was proven numerically and analytically that in order to achieve the highest recovery in different circuit configurations, the best equipment must be placed at the beginning stage of the flotation circuits. The size of the entering particles and the types of streams including pulp and froth were considered as the bas...
متن کاملشبیهسازی مدار خردایش کارخانه فسفات اسفوردی توسط نرمافزار BMCS
Simulation of grinding circuits has being performed from 30 years ago and is also to be more complete and powerful approach with improvement of mathematical models which simulate various processing units/machines. The modeling and simulation of various mineral processing circuits are presently performed. In order to simulate the present grinding circuits of Esfordi Phosphate processing plant, a...
متن کاملPassive Reduced Order Models of Large Scale Rc Circuits
A new method for building a reduced order circuit model, based on symbolic or numerical elimination of the internal circuit nodes, is presented. The circuit passivity is preserved unlike the majority of other approaches. A 1033 node RC circuit is reduced to an admittance with one pole and two zeros for a frequency range of three decades.
متن کاملA Coordinate-transformed Arnoldi Algorithm for Generating Guaranteed Stable Reduced-order Models of Arbitrary Rlc Circuits
Since the rst papers on asymptotic waveform evaluation (AWE), Pad e-based reduced order models have become standard for improving coupled circuit-interconnect simulation eeciency. Such models can be accurately computed using bi-orthogonalization algorithms like Pad e via Lanczos (PVL), but the resulting Pad e approximates can still be unstable even when generated from stable RLC circuits. For c...
متن کاملAnalysis of Planar Microstrip Circuits Using Three-Dimensional Transmission Line Matrix Method
The frequency-dependent characteristics of microstrip planar circuits have been previously analyzed using several full-wave approaches. All those methods directly give characteristic of the circuits frequency by frequency. Computation time becomes important if these planar circuits have to be studied over a very large bandwidth. The transmission line matrix (TLM) method presented in this paper ...
متن کامل