Design and Performance Analysis of 1.8 GHz Low Noise Amplifier for Wireless Receiver Application
نویسندگان
چکیده
In present stereo audio system is a most popular audio system for different purposes. Now a day’s stereo system is commonly used in communication and other purposes. Moreover Normalized Least Mean Square (NLMS) based adaptive filtering is an effective filtering process in case of communication and other applications. However adaptive filtering is an adaptive filter process to cancel out the noise from audio signal successfully. Hence the main objective of this paper is to design a NLMS adaptive filter which cancels out the noise from a noisy wave format stereo audio file. Moreover by varying the order of the adaptive filter (such as 8 th , 16 th , 32 th and 64 th ), the performance of the NMLS adaptive filtered signal with respect to reference and noisy stereo audio signal are analyzed as well.
منابع مشابه
A Concurrent Dual-Band Low Noise Amplifier for GNSS Receivers
In this paper, a new design of concurrent dual-band Low Noise Amplifier (LNA) for multi-band single-channel Global Navigation Satellite System (GNSS) receivers is proposed. This new structure is able to operate concurrently at frequency of 1.2 and 1.57 GHz. Parallel and series resonance parts are employed in the input matching in order to achieve concurrent performance. With respect to used pse...
متن کاملAnalysis and design of a CMOS current reused cascaded distributed amplifier with optimum noise performance
In this paper, analysis, simulation and design of a distributed amplifier (DA) with 0.13µm CMOS technology in the frequency range of 3-40 GHz is presented. Gain cell is a current reused circuit which is optimum in gain, noise figure, bandwidth and also power dissipation. To improve the noise performance in the frequency range of interest, a T-matching low pass filter LC network which is utilize...
متن کاملA Modified Noise Analysis of a Common Source ̶ Common Gate Low Noise Transconductance Amplifier for Sub-micron Technologies
This paper is based on analysis of a common source - common gate low noise transconductance amplifier (CS-CG LNTA). Conventional noise analyses equations are modified by considering to the low output impedance of the sub-micron transistors and also, parasitic gate-source capacitance. The calculated equations are more accurate than calculated equations in other works. Also, analyses show that th...
متن کاملDesign of an S-band Ultra-low-noise Amplifier with Frequency Band Switching Capability
In this paper, an ultra-low-noise amplifier with frequency band switching capability is designed, simulated and fabricated. The two frequency ranges of this amplifier consist of the 2.4 to 2.5 GHz and 3.1 GHz to 3.15 GHz frequency bands. The designed amplifier has a noise figure of less than 1dB, a minimum gain of 23 dB and a VSWR of less than 2 in the whole frequency band. The design process s...
متن کاملDesign and Fabrication of a 911 GHz Balanced Low Noise Amplifier Using HJFET
This paper describes the design of an X-band balanced low noise amplifier (LNA) using an available HJFET device. The balanced LNA consists of a pair of electrically similar transistors whose input and output signals are divided or combined by 3 dB two-stage Wilkinson power dividers. The proposed balanced LNA is fabricated and measured. The measured results show that the noise figure is 1.30 dB ...
متن کاملReview on Design and Performance Analysis of Low Power Transceiver Circuit in Wireless Sensor Network
WSN is wireless sensor network which consist of numbers of nodes. Transceiver has main role in WSN node. Transceiver consists of both transmitter as well as receiver. Power amplifier, low noise amplifier, mixer, voltage control oscillator are the main block of Transceiver. Power amplifiers are a key part of RF transmitters. 2.4 GHz RF CMOS power amplifier implemented with SMIC 0.13μm is propose...
متن کامل