Letter to the Editor: Femoral Component Positioning in Hip Resurfacing with and Without Navigation

نویسنده

  • Andrea Emilio Salvi
چکیده

UNLABELLED Early failures after hip resurfacing often are the result of technical errors in placing the femoral component. We asked whether image-free computer navigation decreased the number of outliers compared with the conventional nonnavigated technique. We retrospectively compared 51 consecutive hip resurfacings performed using image-free computer navigation with 88 consecutive hip resurfacings performed without navigation. Patient demographics were similar. There were no differences in the average native femoral neck-shaft angles, planned stem-shaft angles, or postoperative stem-shaft angles. However, when the postoperative stem-shaft angle was compared with the planned stem-shaft angle, there were 33 patients (38%) in the nonnavigated group with a deviation greater than 5 degrees in contrast to none in the navigated group. Notching was present in four patients in the nonnavigated group and none in the navigated group. The average operative time was 111 minutes for the navigated group and 105 minutes for the nonnavigated group. Image-free navigation decreased the number of patients with potentially undesirable implant placements. LEVEL OF EVIDENCE Level III, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Hip Resurfacing Arthroplasty: Investigating the Femoral Component in the Sagittal Plane

The outcomes of hip resurfacing arthroplasty are largely dependent on prosthesis positioning. The biomechanics of notching, accurate measurement of femoral implant version and the use of computer navigation of the Birmingham Hip Resurfacing procedure were studied in this work. First, biomechanical tests were conducted with varying notch sizes and femoral positions, and it was determined that an...

متن کامل

Imageless computer navigation without pre-operative templating may lead to malpreparation of the femoral head in hip resurfacing.

The computed neck-shaft angle and the size of the femoral component were recorded in 100 consecutive hip resurfacings using imageless computer-navigation and compared with the angle measured before operation and with actual component implanted. The reliability of the registration was further analysed using ten cadaver femora. The mean absolute difference between the measured and navigated neck-...

متن کامل

Letter to the Editor Comparison of acetabular reamings during hip resurfacing versus uncemented total hip arthoplasty

1. SA Brennan, JA Harty, C Gormley, SK O’Rourke. Comparison of acetabular reamings during hip resurfacing versus uncemented total hip arthoplasty. J Orthop Surg (Hong Kong) 2009;17:42–6. To the Editor: We read with interest the article by Brennan et al.1 They concluded that: “In hip resurfacing, the use of an appropriately small femoral component avoids oversizing the acetabular component and r...

متن کامل

Effect of surgical experience on imageless computer-assisted femoral component positioning in hip resurfacing – a preclinical study

BACKGROUND The clinical outcome of hip resurfacing (HR) as a demanding surgical technique associated with a substantial learning curve depends on the position of the femoral component. The aim of the study was to investigate the effects of the level of surgical experience on computer-assisted imageless navigation concerning precision of femoral component positioning, notching, and oversizing ra...

متن کامل

The accuracy of image-free computer navigation in the placement of the femoral component of the Birmingham Hip Resurfacing: a cadaver study.

A cadaver study using six pairs of lower limbs was conducted to investigate the accuracy of computer navigation and standard instrumentation for the placement of the Birmingham Hip Resurfacing femoral component. The aim was to place all the femoral components with a stem-shaft angle of 135 degrees . The mean stem-shaft angle obtained in the standard instrumentation group was 127.7 degrees (120 ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Clinical Orthopaedics and Related Research

دوره 467  شماره 

صفحات  -

تاریخ انتشار 2009