Performance of three- and five-stack achromatic half-wave plates at millimeter wavelengths.
نویسندگان
چکیده
We study the performance of achromatic half-wave plates (AHWPs) as a function of the detection bandwidth of a power detector operating in the millimeter wave band and the spectral shape of the incident radiation. We focus particular attention on the extraction of the degree of incident polarization and its orientation angle from the intensity measured as a function of AHWP rotation angle, which we call the IVA (intensity versus angle). We describe the formalism to extract the two incident polarization parameters. We use this formalism to quantify the phase offset of the IVA and point to potential systematic errors in the extraction of this offset in cases where the incident spectrum is not sufficiently well known. We quantify the phase offset and modulation efficiency as a function of the relative angles between the plates in the stack and find that high modulation efficiency can be achieved with alignment accuracy of a few degrees. We present measurements of the spectral response of an AHWP made with five plates. The measurements predict a modulation efficiency that is higher than 98% for three bands centered at 150, 250, and 410 GHz.
منابع مشابه
Analysis of performance of three- and five-stack achromatic half-wave plates at millimeter wavelengths
We study the performance of achromatic half-wave plates (AHWP) as a function of their construction parameters, the detection bandwidth of a power detector operating in the millimeter wave band, and the spectral shape of the incident radiation. We focus particular attention on the extraction of the degree of incident polarization and its orientation angle from the intensity measured as a functio...
متن کاملA Millimeter-Wave Achromatic Half Wave Plate
We have constructed an achromatic half wave plate (AHWP) suitable for the millimeter wavelength band. The AHWP was made from a stack of three sapphire a-cut birefringent plates with the optical axes of the middle plate rotated by 50.5 degrees with respect to the aligned axes of the other plates. The measured modulation efficiency of the AHWP at 110 GHz was 96 ± 1.5%. In contrast, the modulation...
متن کاملMillimeter-wave achromatic half-wave plate.
We have constructed an achromatic half-wave plate (AHWP) suitable for the millimeter wavelength band. The AHWP was made from a stack of three sapphire a-cut birefringent plates with the opticalaxes of the middle plate rotated by 50.5 deg with respect to the aligned axes of the other plates. The measured modulation efficiency of the AHWP at 110 GHz was 96 +/- 1.5%. In contrast, the modulation ef...
متن کاملOptimal achromatic wave retarders using two birefringent wave plates.
Two plates of different birefringence material can be combined to obtain an achromatic wave retarder. In this work, we achieve a correction for the overall retardation of the system that extends the relation to any azimuth. Current techniques for the design of achromatic wave retarders do not present a parameter that characterizes its achromatism on a range of wavelengths. Thus, an achromatic d...
متن کاملPolarizing beam-splitter based on defective photonic crystals
The performance of a polarizing beam splitter based on the one-dimensional photonic crystals (1D-PCs), is theoretically investigated. The polarizing beam splitter consists of a symmetric stack of the low-index quarter-wave plates and the high-index half-wave plates with a central defect layer of air. The linear transmission properties of the polarizing beam splitter are numerically simulat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 48 19 شماره
صفحات -
تاریخ انتشار 2009