High Refractive Index Immersion Fluids for 193nm Immersion Lithography
نویسندگان
چکیده
For the next-generation immersion lithography technology, there is a growing interest in the immersion fluids having a refractive index larger than 1.5 and low absorbance at 193nm wavelength. In this paper, we report our effort in identifying new immersion fluid candidates. The absolute refractive index values and thermo-optic coefficients, dn/dT, were measured with 1x10 and 1x10 accuracy respectively at 193nm wavelength. The results showed promising candidates having refractive index ranging from 1.5 to 1.65 with low absorbance at 193nm wavelength. Preliminary imaging results with a new immersion fluid gave good 65nm Line/Space patterns. However, the minimum exposure time of 20sec is about ten times as needed for water, indicating the need to further reduce the absorbance of the immersion fluid.
منابع مشابه
25nm Immersion Lithography at a 193nm Wavelength
The physical limitations of lithographic imaging are ultimately imposed by the refractive indices of the materials involved. At oblique collection angles, the numerical aperture of an optical system is determined by nsin(θ) , where n is the lowest material refractive index (in the absence of any refractive power through curvature). For 193nm water immersion lithography, the fluid is the limitin...
متن کاملImmersion lithography with numerical apertures above 2.0 using high index optical materials
The progress of optical lithography has approached the sub-30 nm regime using 193nm excimer lasers as the exposure sources. To increase the numerical aperture (NA) further, many issues, especially those related to materials, need to be addressed. In this paper, we present the analytical and experimental results of oblique two-beam lithography with sapphire (Al2O3) as the optical material. At 19...
متن کاملPumped quantum systems: immersion fluids of the future?
Quantum optical techniques may yield immersion fluids with high indices of refraction without absorption. We describe one such technique in which a probe field experiences a large index of refraction with amplification rather than absorption, and examine its practicality for an immersion lithography application. Enhanced index can be observed in a three-level system with a tunable, near-resonan...
متن کاملSnell or Fresnel – The influence of material index on hyper NA lithography
As immersion lithography is extended to ever increasing resolution, the resulting propagation angles in the materials involved become closer to grazing than to normal incidence. Classical laws of refraction and reflection cannot be used with either assumption however, as a collection of angles may exist across the entire range. Fresnel reflection at these angles becomes large enough that small ...
متن کاملAlternative Optical Technologies - More than curiosities?
As optical lithography reaches it physical limits, alternative technologies become interesting. There have been several such alternatives that are still optical, but have some departure from conventional projection methods. This papers presents some of these alternative optical technologies, namely the use of surface plasmons and plasmonic lithography, metamaterials and superlenses, evanescent ...
متن کامل