Diffractive Optical Elements for Passive Infrared Detectors
نویسندگان
چکیده
Complex diffractive lens arrays for passive infrared detection systems have been designed and fabricated by laser beam writing and injection moulding. Continuous relief profiles with depths up to 20 μm were originated, characterised and replicated. 1999 Optical Society of America OCIS codes: (050.1970, 120.1880)
منابع مشابه
Improving 3-D Imaging Breast Cancer Diagnosis Systems Using a New Method for Placement of Near-Infrared Sources and Detectors
The objective of this research was to improve 3-D imaging system by near-infrared light emission in breast tissue to achieve a more accurate diagnosis of tumor. The results of repeated experiments in this research have shown that with this imaging system, a more accurate diagnosis of abnormal area depends on the location of the sources and detectors. Therefore, an optimal location model has bee...
متن کاملWood's anomalies and spectral uniformity of focusing diffractive optical elements.
We report on simulations and measurements of focusing diffractive optical elements, fabricated as two-level binary optics. The diffractive optical elements are designed to separate and focus four specific wavelengths in the infrared. The simulations are based on a local linear grating model, and predict anomalies similar to Wood's anomalies known from grating diffraction theory. The anomalies a...
متن کاملDiffractive optical elements for the production of synthetic spectra
We demonstrate that computer-generated di€€ractive optical elements can be used to synthesize the infrared spectra of real compounds. In particular, we describe a modified phase-retrieval algorithm that we have used to design diffractive elements of this type and we present experimental results for a di€Fractive optic which is capable of synthesizing the infrared spectrum of €IF between 3600 cm...
متن کاملEvaluate The Behavior of PIN infrared detector via COMSOL software
Infrared detectors can be used for a variety of applications such as: using in fiber-optic communications. Conventional technology for IR detectors is using p-i-n structure based on GaAs compound. This paper reports on the design and modeling of an IR detector using a p-i-n GaAs structure. Comsol software is used to simulate the model and the detector is discussed for terminal current, dopant p...
متن کاملRefractive Dual Band Infrared Imager Optical Design
Infrared imagers are important for reorganization and monitoring. This paper discusses the design of an infrared imager. Optical design in medium wavelength infrared (MWIR) and long wavelength infrared (LWIR) bands is different and needs distinct detectors and materials. Reflective systems are not suitable due to their small field of view (FOV) and vignetting. Refractive dual band optical syste...
متن کامل