Pharmaceutical Compostons in the Form of Foam
نویسندگان
چکیده
57 ABSTRACT A liquid pharmaceutical composition which can be administered as a foam by means of suitable supplying devices, without necessity of gas propeller, said compo sition consisting of: a) one or more natural or synthetic ionic or non ionic, acid, basic or neutral surfactants; b) a solvent or a solvent mixture; c) an active ingredient or a combination of active ingredients; d) optionally mucoadhesive or thermosetting poly mers; e) optional adjuvants or excipients.
منابع مشابه
Immobilization of Streptomyces gulbargensis in Polyurethane Foam: A Promising Technique for L-asparaginase Production on
In the present study, Streptomyces gulbargensis and its mutant form, S.gulbargensis mu24, immobilized on polyurethane foam were investigated for the production of L-asparaginase using groundnut cake extract as medium. The medium with an initial pH of 8.5 was inoculated with free and immobilized cells separately and then subjected to fermentation by incubation at 40oC and shaking at 200 rev/min....
متن کاملDrug delivery properties of macroporous polystyrene solid foams.
PURPOSE Polymeric porous foams have been evaluated as possible new pharmaceutical dosage forms. METHODS These materials were obtained by polymerization in the continuous phase of highly concentrated emulsions prepared by the phase inversion temperature method. Their porosity, specific surface and surface topography were characterized, and the incorporation and release of active principles was...
متن کاملStability of minoxidil in Espumil foam base.
Minoxidil is a drug used to stimulate hair growth and to slow balding. It is marketed under a number of trade names, including Rogaine, and is available in varying strength dose forms from a number of generic manufacturers. Minoxidil is available in oral and topical forms. In topical form, it can be applied by a metered-spray or rub-on applicator. A hydroalcoholic compounding vehicle can minimi...
متن کاملEXPERIMENT AND APPLICATION OF AN ANNULAR FOAM BREAKER FOR FOAM DRILLING FLUID (RESEARCH NOTE)
The annular foam breaker is one which uses the vacuum and shear force generated by the Coanda effect to break foam. Its effectiveness in destroying drilling foam has been test in wellbore flow simulation loop experimental stand. Experimental results showed that the operating pressure of the annular foam breaker should be larger than 0.6MPa and the stabilizers concentration of the foam drilling ...
متن کاملInvestigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC
Amorphous steel slag was blended with different concentrations of waste glass (20, 40, 50, 60, 70 wt.%) and SiC to obtain a composite. According to Hot Stage Microscopy images, slag-glass composite contractions started at 1050 ºC. scanning electron microscope micrographs of slag-SiC (foaming agent) composite revealed tunnel-like porosities of 500 to 1000 microns. Gaseous products of carbide dec...
متن کامل