Micro-channels machined in microstructured optical fibers by femtosecond laser.

نویسندگان

  • Adriaan van Brakel
  • Christos Grivas
  • Marco N Petrovich
  • David J Richardson
چکیده

Micro-channels were fabricated in hollow-core photonic bandgap fiber (HC-PBGF) and suspended-core holey fiber (SC-HF) by femtosecond Ti:sapphire laser irradiation. Gaseous access was demonstrated via these engineered ports to the core of HC-PBGF and the hollow cladding of SC-HF. Femtosecond laser micro-machining caused no additional transmission loss in HC-PBGFs. This allowed a novel gas cell to be produced, in which gaseous access was provided solely through two micro-channels. Acetylene diffusion was also confirmed through a micro-channel leading to a single cladding airhole in SC-HF. This further highlighted the fabrication technique's precision, selectivity, and potential for developing fiber-based micro-fluidic devices.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Femtosecond laser-assisted selective infiltration of microstructured optical fibers.

A new method of selectively infiltrating microstructured optical fibers with the assistance of femtosecond laser micromachining is presented. With this technique, any type of air-holes in the cross-section of the microstructured optical fibers can be selectively infiltrated with liquids, which opens up a highly efficient, precise, flexible and reliable way of selective infiltrating and has high...

متن کامل

Fabrication, splicing, Bragg grating writing, and polyelectrolyte functionalization of exposed-core microstructured optical fibers.

Femtosecond laser written Bragg gratings have been written in exposed-core microstructured optical fibers with core diameters ranging from 2.7 µm to 12.5 µm and can be spliced to conventional single mode fiber. Writing a Bragg grating on an open core fiber allows for real-time refractive index based sensing, with a view to multiplexed biosensing. Smaller core fibers are shown both experimentall...

متن کامل

Ultrafast femtosecond-laser-induced fiber Bragg gratings in air-hole microstructured fibers for high-temperature pressure sensing.

We present fiber Bragg grating pressure sensors in air-hole microstructured fibers for high-temperature operation above 800 degrees C. An ultrafast laser was used to inscribe Type II grating in two-hole optical fibers. The fiber Bragg grating resonance wavelength shift and peak splits were studied as a function of external hydrostatic pressure from 15 psi to 2000 psi. The grating pressure senso...

متن کامل

Enhanced machining of steel using femtosecond pulse pairs

In this study we report on the ablation of steel using femtosecond double-pulse trains. Double-pulse trains with pulse-to-pulse separations between 1 ps and 1 ns were used to machine micro-channels in a steel sample. The depths of the laser-ablated channels were measured to characterize the efficiency of the ablation process. Results show that using a double-pulse train with an optimal separati...

متن کامل

Novel Sensor and Telecommunication Applications of Photonic Crystal Fibers

Photonic crystal fibers are novel optical waveguides containing a periodic array of air holes running along the fiber around a solid or hollow core. These fibers have recently attracted great interest in many research areas such as in nonlinear optics and measurement science as their manufacturing process allows for a high flexibility in the fiber design. Index-guiding photonic crystal fibers a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics express

دوره 15 14  شماره 

صفحات  -

تاریخ انتشار 2007