The Influence of Ink Concentration and Layer Thickness on Yellow Colour Reproduction in Liquid Electrophotography Toner
نویسندگان
چکیده
Original scientific paper In liquid toner electrophotography, colour gamut is often diminished in the yellow region leading to problems with photo quality prints. It is known that the concentration of pigment particles in the printing ink and its thickness when applied on a paper substrate decisively influence final print quality. Variation of these two parameters for the yellow process ink was performed by modifying the printing process of the electrophotographic printer HP Indigo S1000. Printed colour patches of ECI test chart were analysed colorimetrically and using image analysis approach. Two-way analysis of variance was implemented to statistically assess the obtained results. Both studied responses – colour gamut volume and area coverage of halftone dots – were found to be primarily influenced by the yellow ink layer thickness and much less by the ink concentration. Increase from one to two ink layers had a significantly stronger effect on each of the two responses when compared to an additional increase from two to three layers.
منابع مشابه
New dispersed-dot halftoning technique by elimination of unstable pixels for electrophotography
New dispersed New dispersed-dot dot halftoning halftoning technique technique by elimination of unstable pixels by elimination of unstable pixels for for electrophotography electrophotography Problem about printing process of electrophotography – Analog unstableness • Stochastic reproduction of small dots • Degradation of image quality Proposal method – New dispersed-dot halftoning • Combin...
متن کاملTwo-phase Boundary Layer Flow, Heat and Mass Transfer of a Dusty Liquid past a Stretching Sheet with Thermal Radiation
The problem of two-phase MHD boundary layer flow, heat and mass transfer over a stretching sheet with fluid-particle suspension and thermal radiation has been studied. The effect of mass transfer in dusty fluid over a stretching sheet is considered for the first time. The governing equations are reduced to a set of non-linear ordinary differential equations under suitable similarity transforma...
متن کاملEffect of Ink Formulation and Paper Surface Morphology on Ink-jet Printing Properties
The purpose of this study was to investigate the effect of type of alcohols and humectants in inks formulation, and the papers surface morphology on the ink-jet printing properties. In order to investigate the influence of alcohol and humectant types on printing properties, the optimum ink formulation from previous study, which contained C.I. Reactive Blue 21 Ink2 was formulated with different ...
متن کاملRecognition of Sequence of Print and Ink Strokes: Investigation the Effect of Handwriting Pressure, Hue of Ink, Printer and Paper Type
By introducing of digital techniques, forensic document examiners has been encouraged to work with better accuracy in non-destructive ways. The aim of this study was to present a non-destructive, accessible, economic (affordable), user friendly, portable, useful and easy technique for specifying the order of crossing lines of ink stroke and printed text. The intersections of LaserJet and In...
متن کاملThe Effect of Reactive Dye Structure on the Ink-Jet Printing of Cotton
The purpose of this study was to investigate the effect of the structure of reactive dye on cotton ink-jet printing. Cotton fabric was printed upon with three commercial cellulosic reactive dyes which are based on the similar chromophore and possess different numbers of reactive and anionic groups. Colour yield and absorbed dye fixation of the printed cotton were evaluated at various pHs. The i...
متن کامل