A Comparison of Needle Bending Models

U-Bending Analysis with an Emphasis on Influence of Hardening Models

In this paper the effect of different hardening models in simulating the U-bending process for AA5754-O and DP-Steel, taking a benchmark of NUMISHEET 93 2-D draw bending, has been discussed. The hardening models considered in simulations are: isotropic hardening, pure (linear) kinematic hardening and combined (nonlinear kinematic) hardening. The influence of hardening models on predicting sprin...

Modeling and simulation of flexible needles.

Needle insertion is performed in many clinical and therapeutic procedures. Tissue displacement and needle bending which result from needle-tissue interaction make accurate targeting difficult. For performing physicians to gain essential needle targeting skills, needle insertion simulators can be used for training. An accurate needle bending model is essential for such simulators. These bending ...

Comparison of the bending-moment resistance of wood-plate and dowel joints in particleboard and lodgepole pine lumber

Concept design of Vehicle Structure for the purpose of computing torsional and bending stiffness

Automotive design engineers face the challenging problem of developing products in highly competitive markets. In this regard, using conceptual models in the first step of automotive development seems so necessary. In this paper, to make a body in white conceptual model, an engineering approach is developed for the replacement of beam-like structures, joints, and panels in a vehicle model. The ...

Thermal Conductivity of Cu and Al-Water Nanofluids

Nanofluids are suspensions of nanoparticles in the base fluids, a new challenge for thermal sciences provided by nanotechnology. In this paper, the tested fluids are prepared by dispersing the Al and Cu into water at three different concentrations such as 500, 1000 and 2000 ppm. Thermal conductivities of these fluids are measured experimentally by thermal property analyzer i.e. KD2 Pro by using...