Parallel combinatorial chemical synthesis using single-layer poly(dimethylsiloxane) microfluidic devices.

نویسندگان

  • Joseph P Dexter
  • William Parker
چکیده

Improving methods for high-throughput combinatorial chemistry has emerged as a major area of research because of the importance of rapidly synthesizing large numbers of chemical compounds for drug discovery and other applications. In this investigation, a novel microfluidic chip for performing parallel combinatorial chemical synthesis was developed. Unlike past microfluidic systems designed for parallel combinatorial chemistry, the chip is a single-layer device made of poly(dimethylsiloxane) that is extremely easy and inexpensive to fabricate. Using the chip, a 2x2 combinatorial series of amide-formation reactions was performed. The results of this combinatorial synthesis indicate that the new device is an effective platform for running parallel organic syntheses at significantly higher throughput than with past methodologies. Additionally, a design algorithm for scaling up the 2x2 combinatorial synthesis chip to address more complex cases was developed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and fabrication of chemically robust three-dimensional microfluidic valves.

A current problem in microfluidics is that poly(dimethylsiloxane) (PDMS), used to fabricate many microfluidic devices, is not compatible with most organic solvents. Fluorinated compounds are more chemically robust than PDMS but, historically, it has been nearly impossible to construct valves out of them by multilayer soft lithography (MSL) due to the difficulty of bonding layers made of "non-st...

متن کامل

Micromolding of solvent resistant microfluidic devices.

We demonstrate a rapid fabrication procedure for solvent-resistant microfluidic devices based on the perfluoropolyether (PFPE) SIFEL. We carefully modified the poly-dimethylsiloxane (PDMS) micromolding procedure, such that it can still be executed using the standard facilities for PDMS devices. Most importantly, devices with a thin SIFEL layer for the patterned channels and a PDMS support layer...

متن کامل

Poly(dimethylsiloxane) as a material for fabricating microfluidic devices.

This Account summarizes techniques for fabrication and applications in biomedicine of microfluidic devices fabricated in poly(dimethylsiloxane) (PDMS). The methods and applications described focus on the exploitation of the physical and chemical properties of PDMS in the fabrication or actuation of the devices. Fabrication of channels in PDMS is simple, and it can be used to incorporate other m...

متن کامل

Microfluidic Protein Patterning on Silicon Nitride Using Solvent Extracted Poly(dimethylsiloxane) Channels.

Biomolecular patterning is essential for the creation of sensing motifs that rely on receptor-ligand binding for selectivity. Microfluidic devices have the potential to aid in the development of simple, robust methods for biomolecular patterning and therefore contribute to the generation of protein, DNA, and cell microarrays. In microfluidic patterning, the choice of both substrate and microflu...

متن کامل

Permeation-driven flow in poly(dimethylsiloxane) microfluidic devices.

Poly(dimethylsiloxane) is currently the material of choice for rapidly fabricating microfluidic devices. As the size of these devices decreases, a significant hydrodynamic flow is generated due to permeation of fluid through the channel walls. We develop a theoretical model verified by single bead tracking experiments, which demonstrates that large flow rates (>10 microm/s) can be passively gen...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Biomicrofluidics

دوره 3 3  شماره 

صفحات  -

تاریخ انتشار 2009