CuInS2 nanotube array on indium tin oxide: synthesis and photoelectrochemical properties.
نویسندگان
چکیده
CuInS(2) nanotube (NT) arrays were synthesized on indium tin oxide (ITO) substrates for the first time using a successive ionic layer absorption and reaction (SILAR) process with self-dissolved ZnO nanowire (NW) templates. The p-type CuInS(2) NT array shows promising conversion efficiency in a photoelectrochemical cell with polysulfide electrolyte.
منابع مشابه
Investigation on Stability of Electroplated-Sulfurized CuInS2- based Photocathode Modified with an In2S3 Layer for H2 Evolution under Various pH Conditions
We investigated photoelectrochemical water splitting properties of Pt-In2S3/CuInS2 photocathodes from near neutral toward basic condition (pH 6, 9, and 13). Half-cell solar-to-hydrogen (HC-STH) of Pt-In2S3/CuInS2 measured under 0.2 M NaH2PO4 was the highest when the pH of the solution was 13 (4.7% at 0.42 V vs. RHE) with a maximum photocurrent density of 16.3 mA cm-2 (at 0 V vs. RHE) and onset ...
متن کاملPhotoelectrochemical Properties of Highly Oriented ZnO Nanotube Array Films on ITO Substrates
Highly oriented ZnO nanotube array films on the conducting substrates have been synthesized by a simple hydrothermal method and characterized by scanning electron microscopy (SEM) and UV-Vis spectroscopy. The thin films consisting of laterally fragmentized ZnO nanotubes with controlled orientation have been tested as photoanode in Grätzel-type solar cell. For a sandwich-type cell, with 0.5 mol/...
متن کاملEfficient perovskite solar cells based on low-temperature solution-processed (CH3NH3)PbI3 perovskite/CuInS2 planar heterojunctions
In this work, the solution-processed CH3NH3PbI3 perovskite/copper indium disulfide (CuInS2) planar heterojunction solar cells with Al2O3 as a scaffold were fabricated at a temperature as low as 250°C for the first time, in which the indium tin oxide (ITO)-coated glass instead of the fluorine-doped tin oxide (FTO)-coated glass was used as the light-incidence electrode and the solution-processed ...
متن کاملVisible light-driven CdSe nanotube array photocatalyst
Large-scale CdSe nanotube arrays on indium tin oxide (ITO) glass have been synthesized using ZnO nanorod template. The strong visible light absorption in CdSe, its excellent photoresponse, and the large surface area associated with the tubular morphology lead to good visible light-driven photocatalytic capability of these nanotube arrays. Compared to freestanding nanoparticles, such one-piece n...
متن کاملEnhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 46 32 شماره
صفحات -
تاریخ انتشار 2010