Properties of photocured epoxy resin materials for application in piezoelectric ultrasonic transducer matching layers.

نویسندگان

  • Alexandre Trogé
  • Richard L O'Leary
  • Gordon Hayward
  • Richard A Pethrick
  • Anthony J Mullholland
چکیده

This paper describes the acoustic properties of a range of epoxy resins prepared by photocuring that are suitable for application in piezoelectric ultrasonic transducer matching layers. Materials, based on blends of diglycidyl ether of Bisphenol A and 1,4-cyclohexanedimethanol diglycidyl ether, are described. Furthermore, in order to vary the elastic character of the base resin, samples containing polymer microspheres or barium sulfate particles are also described. The acoustic properties of the materials are determined by a liquid coupled through transmission methodology, capable of determining the velocity and attenuation of longitudinal and shear waves propagating in an isotropic layer. Measured acoustic properties are reported which demonstrate materials with specific acoustic impedance varying in the range 0.88-6.25 MRayls. In the samples comprising blends of resin types, a linear variation in the acoustic velocities and density was observed. In the barium sulfate filled samples, acoustic impedance showed an approximately linear variation with composition, reflecting the dominance of the density variation. While such variations can be predicted by simple mixing laws, relaxation and scattering effects influence the attenuation in both the blended and filled resins. These phenomena are discussed with reference to dynamic mechanical thermal analysis and differential scanning calorimetry of the samples.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Piezoelectric Materials for Ultrasonic Transducers : Review of Recent Developments

First, a brief review of available classes of piezoelectric materials (in particular emergent piezoelectric single crystals) and specific requirements for medical imaging applications is made. Several piezoelectric materials are retained for two specific applications (50 MHz high frequency single element transducer and high density 2D array) to simulate and compare the overall transducer perfor...

متن کامل

Characterization of Ultra-thin Quarter-wavelength Matching Layers of High Frequency Ultrasonic Transducers

The quarter-wavelength (hi4) acoustic matching layer is a vital component in medical ultrasonic transducers, which can bridge the large acoustic impedance mismatch between the piezoelectric material and the human body. .At high frequencies (>5OMHz), the hi4 matching layers become extremely thin and the characterization of its properties becomes very challenging. We report a novel method to meas...

متن کامل

A Fiber Optic Ultrasonic System to Monitor the Cure of Epoxy

A fiber optic ultrasonic system is described which monitors the cure of an epoxy resin. Ultrasound is generated using a high-power optical fiber to deliver high-energy pulses of light to the prepared surface of an aluminum mold that contains the curing epoxy resin. The generated ultrasound is detected using a local fiber optic ultrasound sensor embedded in the curing epoxy resin. The system was...

متن کامل

Broadband and High Sensitive Time-of-Flight Diffraction Ultrasonic Transducers Based on PMNT/Epoxy 1–3 Piezoelectric Composite

5-6 MHz PMNT/epoxy 1-3 composites were prepared by a modified dice-and-fill method. They exhibit excellent properties for ultrasonic transducer applications, such as ultrahigh thickness electromechanical coupling coefficient k(t) (85.7%), large piezoelectric coefficient d33 (1209 pC/N), and relatively low acoustic impedance Z (1.82 × 107 kg/(m2·s)). Besides, two types of Time-of-Flight Diffract...

متن کامل

Application of Bare Piezoelectric Ceramics in Monitoring Resin Transfer Moulding (RTM) Process

This paper investigates application of piezoelectric ceramics mounted on surface of mould to monitor flow front and curing phases of resin in Resin Transfer Moulding (RTM) process. The piezoelectric ceramic is used for both generating ultrasound and measuring energy of echoed ultrasonic wave at the interface of mould and resin. One of the advantages of this method is that the piezoelectric cera...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of the Acoustical Society of America

دوره 128 5  شماره 

صفحات  -

تاریخ انتشار 2010