Improved methods of reflection seismic data processing for velocity estimation, imaging, and interpretation
نویسندگان
چکیده
Seismic images and the geologic information they provide contribute significantly to our understanding of the earth’s subsurface. In this thesis, I focus on methods relevant for constructing and interpreting seismic images, including methods for velocity estimation, seismic imaging, and interpretation, which together address key aspects of reflection seismic data processing. Specifically, I propose improved methods for semblance-based normal-moveout velocity analysis, for seismic imaging by least-squares migration, and for the automatic extraction of geologic horizons. To compute a seismic image, an estimate of the subsurface velocity is needed. One common method for constructing an initial velocity model is semblance-based normal-moveout (NMO) velocity analysis, in which semblance spectra are analyzed to identify peaks in semblance corresponding to effective NMO velocities. The accuracy of NMO velocities obtained from semblance spectra depends on the sensitivity of semblance to changes in velocity. By introducing a weighting function in the semblance calculation, I emphasize terms that are more sensitive to velocity changes, which, as a result, increases the resolution of semblance spectra and allows for more accurate NMO velocity estimates. Following velocity analysis, a seismic image of the subsurface is computed by migrating the recorded data. However, while velocity analysis is an important step in processing reflection seismic data, in practice we expect errors in the velocity models we compute, and these errors can degrade a seismic image. Instead of minimizing the difference between predicted and observed seismic data as is done for conventional migration, I propose to minimize the difference between predicted and time-shifted observed data, where the time shifts are the traveltime differences between predicted and observed data. With this misfit function, an image computed for an erroneous velocity model contains features similar to those obtained using a more accurate velocity.
منابع مشابه
Subsurface modeling of mud volcanoes, using density model and analysis of seismic velocity
Detection of subsurface structures by means of gravity method can be used to determine mass distribution and density contrast of rock units. This distribution could be detected by different geophysical methods, especially gravity method. However, gravity techniques have some drawbacks and can't be always successful in distinguishing subsurface structures. Performance of the gravity technique co...
متن کاملImproving seismic image in complex structures by new solving strategies in the CO-CRS and the CO-CDS methods
Conventional seismic imaging possesses problem in exposing structural detail in complex geological media. Nevertheless, some recently introduced methods reduce this ambiguity to some extent, by using data based imaging operator or emancipation from the macro-velocity model. The zero offset common reflection surface (ZO-CRS) stack method is a velocity independent imaging technique which is frequ...
متن کاملApplying Reflection Tomography in the Postmigration Domain to Multifold Ground-Penetrating Radar Data
Acquisition and processing of multifold groundpenetrating radar (GPR) data enable detailed measurements of lateral velocity variability. The velocities constrain interpretation of subsurface materials and lead to significant improvement in image accuracy when coupled with prestack depth migration (PSDM). Reflection tomography in the postmigration domain was introduced in the early 1990s for vel...
متن کاملOptimizing design of 3D seismic acquisition by CRS trace interpolation
Land seismic data acquisition in most of cases suffers from obstacles in fields which deviates geometry of the real acquired data from what was designed. These obstacles will cause gaps, narrow azimuth and offset limitation in the data. These shortcomings, not only prevents regular trace distribution in bins, but also distorts the subsurface image by reducing illumination of the target formatio...
متن کاملHow Does Seismic Data Quality Influence Pore Pressure Estimation and Interpretation?
There are two main approaches for pore pressure estimation: geological using basin modeling and geophysical using seismic velocity. In this paper, seismic velocity was used for pore pressure estimation. The impact of the input data quality in terms of signal-to-noise ratio (SNR) and frequency bandwidth on the accuracy of seismic velocity analysis and, ultimately, the reliability of pore pressur...
متن کامل