The Study on High Speed Turning Parameters Optimization of Tc21 Titanium Alloy
نویسندگان
چکیده
The surface roughness was measured by orthogonal test of TC21 titanium alloy, and the surface roughness prediction model was established based on response surface theory. With the maximum material removal rate as the optimization target, the high speed turning parameters of TC21 titanium alloy with certain surface roughness were optimized by genetic algorithm and optimize the production process, with a view to play a guiding role in the production practice.
منابع مشابه
Machinability evaluation of Titanium alloy in Laser Assisted Turning
The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...
متن کاملMachinability evaluation of Titanium alloy in Laser Assisted Turning
The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...
متن کاملEvaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملMachinability Investigation of Inconel 657 in High-speed Turning
A high strength nickel chromium alloy (50Cr-50Ni-Nb alloy), commonly referred to as IN-657, is specifically used for components in furnaces which are fired by low grade fuel oils containing high levels of vanadium, sodium and sulphur. The purpose of this study is to experimentally investigatethe effect of machining parameters on machinability in turning of Inconel 657. The considered parameters...
متن کاملModeling of Tool Wear Parameters in High-Pressure Coolant Assisted Turning of Titanium Alloy Ti-6Al-4V Using Artificial Neural Networks
Titanium alloy (Ti-6Al-4V) can be economically machined with high-pressure coolant (HPC) supply. In this study, an artificial neural network (ANN) model was developed for the analysis and prediction of tool wear parameters when machining Ti-6Al-4V alloy with conventional flow and high-pressure coolant flow, up to 203 bar. Machining trials were conducted at different cutting conditions for both ...
متن کامل