Deformation of elastomeric chains related to the amount and time of stretching.

نویسندگان

  • Denise Yagura
  • Paulo Eduardo Baggio
  • Luiz Sérgio Carreiro
  • Ricardo Takahashi
چکیده

OBJECTIVE To investigate a potential relationship between degree of stretching and resulting permanent deformation of elastomeric chains (ECs) as well as whether or not stretching time has any bearing on the degree of permanent deformation. METHODS Five-module segments of closed elastomeric chains manufactured by 3M Unitek were stretched to 10-100% of their original length in devices especially designed for this purpose, remaining submerged in artificial saliva at 37 ± 1° C and were removed sequentially after 1, 2, 3 and 4 weeks. Upon removal, each segment was measured and, once recorded the values, were statistically analyzed with the purpose of assessing the degree of permanent deformation. CONCLUSIONS It was concluded that permanent deformation is directly proportional to the degree of stretching of the ECs assessed. The mean percentages found were 8.4% to 10% of stretching, and exceeding 20% (21.3%) when stretched by 40%, and reaching 56.6% permanent deformation when stretched 100% of their original length. Finally, the highest percentage of permanent deformation occurred during the first week and was not statistically significant after this period.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Comparing the elastomeric behavior and force degradation pattern between different orthodontic elastomeric chains

Background and Aims: Elastomeric chains are known as a current device with the purpose of dental movement in orthodontic treatments. The aim of this study was to compare the elastomeric behavior and force degradation rate between different elastomeric chains existing in Iran in different time durations. Materials and Methods: 11 different elastomeric chains used in this study were: Class One, ...

متن کامل

Seismic Risk Assessment of Optimally Designed Highway Bridge Isolated by Ordinary Unbounded Elastomeric Bearings

Recent experimental research has shown that ordinary unbounded steel reinforced elastomeric bearings (SREBs) can be considered as an attractive cost-effective option for the seismic isolation of highway bridges. To further investigate its benefits, the current study is focused on the seismic risk assessment of an optimally designed highway bridge isolated by SREB system. A typical three-span hi...

متن کامل

Magneto-electro-mechanical size-dependent vibration analysis of three-layered nanobeam with initial curvature considering thickness stretching

Thickness stretching effect based on shear and normal deformation theory is used in this paper for magneto-electro-elastic vibration analysis of a three-layered curved nanobeam including a nano core and two piezo-magnetic layers. Size-dependency is included in derivation of governing equations of motion based Eringen's nonlocal elasticity theory. The initial curvature is accounted in calculatio...

متن کامل

An investigation into UV light exposure as an experimental model for artificial aging on tensile strength and force delivery of elastomeric chain.

This study investigated the effect of ultraviolet type A light (UVA) exposure on the tensile properties of elastomeric chain. UVA light exposure was used as model for artificial aging, simulating prolonged storage of elastomeric chain. Tensile strength (n = 60) was measured after exposing Ormco, Forestadent and 3M chains to UVA light for 0, 2, 3, and 4 weeks. Force decay was measured (n = 60) u...

متن کامل

In vitro evaluation of force degradation of elastomeric chains used in orthodontics.

OBJECTIVE To analyze the in vitro force degradation of four different brands of elastomeric chains: American Orthodontics, Morelli, Ormco and TP Orthodontics. METHODS The sample consisted of 80 gray elastomeric chains that were divided into four groups according to their respective manufacturers. Chain stretching was standardized at 21 mm with initial force release ranging from 300 g to 370 g...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Dental press journal of orthodontics

دوره 18 3  شماره 

صفحات  -

تاریخ انتشار 2013