Influence of Heterogeneous Textures of Polypropylene/Ethylene-Propylene-Rubber Blends on Dynamic Viscoelastic Properties in Molten State
نویسندگان
چکیده
Heterogeneous textures due to phase separation in molten polypropylene (PP)/ ethylene-propylene-rubber (EPR) blends were investigated in relation to their dynamic viscoelastic properties. As characteristic to heterogeneous liquids, slow relaxation mechanisms due to the existence of such phases were found for dynamic moduli of PP/EPR blends. These moduli were analyzed by using the linear viscoelastic constitutive equation for an emulsion model developed for the concentrated emulsion and the blending equation for dissimilar polymer system. The results show that the matrix of PP/EPR blends is not pure PP but the mixture of PP and EPR. For the same blend composition, the EPR concentration in the matrix PP phase was larger for EPR containing more propylene units. For the blends having the same EPR, the EPR concentration in the matrix was larger for higher EPR content.
منابع مشابه
Interrelationships of morphology, thermal and mechanical properties in uncrosslinked and dynamically crosslinked PP/EOC and PP/EPDM blends
Thermoplastic vulcanizates (TPVs) based on polypropylene (PP) with ethylene octene copolymer (EOC) and ethylene propylene diene rubber (EPDM) have been developed by coagent assisted dicumyl peroxide crosslinking system. The study was pursued to explore the influence of two dissimilar polyolefin polymers (EOC and EPDM) having different molecular architectures on the state and mode of dispersion ...
متن کاملExperimental Identification of Viscoelastic Properties of Rubber Blends by Means of a Torsional Rheometer
The dimensioning of injection heads for the extrusion of rubber profiles is exclusively based on empiric knowledge of the non-linear flow behaviour of elastomers. The swelling of the extrudate when emerging from a capillary is typical for viscoelastic fluids, such as polymers and rubber blends, respectively. Therefore, the experimental investigation and numerical treatment of this swelling beha...
متن کاملMorphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC
In this study, eight binary blends of polypropylene (PP)/ poly [styrene-b-(ethylene-co butylene)-b-styrene] tri-block copolymer (SEBS) and polypropylene (PP)/ polycarbonate (PC) were produced at different composition through twin screw extruder. The composition of the minor phases was changed to correlate the morphology and mechanical properties of binary blends (PP/PC and PP/SEBS) through ther...
متن کاملExperimental Investigation and Identification of Material Parameters for Rubber Blends
Capillary rheometry simulates polymer extrusion in a simplified way. It allows the characterisation of polymers by means of determination of the viscosity function and extrudate swell. As regards viscous properties, there is still a lack of constitutive characterisation of rubber blends. In this contribution new concepts are presented how the viscous properties are computed without using common...
متن کاملActive site nature of magnesium dichloride-supported titanocene catalysts in olefin polymerization
Heterogeneous Ziegler-Natta and homogeneous metallocene catalysts exhibit greatly different active sitenature in olefin polymerization. In our previous study, it was reported that MgCl2-supported titanocenecatalysts can generate both Ziegler-Natta-type and metallocene-type active sites according to the type of activators.The dual active site nature of the supported titanocene catalysts was furt...
متن کامل