Synthesis and Characterization of Nano Structured Pd-Ni and Pd-Ni-C Composites Towards Electrooxidation of Alcohols

نویسندگان

  • R. Awasthi
  • R. N. Singh
چکیده

Nanostructured (100-x)% Pd -x % Ni (x = 1, 2, 5, 10, and 20) and (90 – y)%Pd-10%Ni-y%C (y = 0.5, 1, 2, 5, and 10) composite films are obtained on glassy carbon electrodes and characterized by XRD, TEM, cyclic voltammetry and chronoamperometric techniques for use as electrocatalysts towards methanol, ethanol, ethylene glycol and glycerol oxidations in 1 M KOH at 25°C. Results show that addition of Ni from 1 to 20% to the pure Pd electrode increases the electrocatalytic activity for electrooxidation of each alcohol showing maximum with 10% Ni. Further, all the Pd-Ni composite electrodes exhibit better electrocatalytic performance in the case of ethanol electrooxidation. The rate of electrooxidation of different alcohols on the active 90%Pd-10 % Ni electrode at E = -0.20 V in 1 M KOH is observed to follow the order: ethanol > methanol> ethylene glycol > glycerol. Incorporation of C from 0.5 to 10% to the active Pd10% Ni composite improves the electrocatalytic performance of the electrode further, the magnitude of improvement being greatest with 5%C. The apparent electrocatalytic activity of the active 90%Pd-10%Ni electrode at E = -0.20 V is enhanced ~ 1.3 to 2.1 times with introduction of 5%C.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A novel study on the stepwise electrodeposition approach for the synthesis of Pd based nanoparticles, characterization, and their enhanced electrooxidation activities

Herein, a stepwise electrodeposition technique was used to synthesize the Pd based nanoparticles on indium-tin oxide (ITO) electrodes. First of all, Pd nanoparticles were electrodeposited on ITO via one step electrodeposition technique. Furthermore, Au was electrodeposited on Pd. Finally, Co was electrodeposited on Au and Pd electrodeposited ITO electrode via stepwise electrodeposition techniqu...

متن کامل

A novel study on the stepwise electrodeposition approach for the synthesis of Pd based nanoparticles, characterization, and their enhanced electrooxidation activities

Herein, a stepwise electrodeposition technique was used to synthesize the Pd based nanoparticles on indium-tin oxide (ITO) electrodes. First of all, Pd nanoparticles were electrodeposited on ITO via one step electrodeposition technique. Furthermore, Au was electrodeposited on Pd. Finally, Co was electrodeposited on Au and Pd electrodeposited ITO electrode via stepwise electrodeposition techniqu...

متن کامل

3D-nanoarchitectured Pd/Ni catalysts prepared by atomic layer deposition for the electrooxidation of formic acid

Three-dimensionally (3D) nanoarchitectured palladium/nickel (Pd/Ni) catalysts, which were prepared by atomic layer deposition (ALD) on high-aspect-ratio nanoporous alumina templates are investigated with regard to the electrooxidation of formic acid in an acidic medium (0.5 M H2SO4). Both deposition processes, Ni and Pd, with various mass content ratios have been continuously monitored by using...

متن کامل

Improved ethanol electrooxidation performance by shortening Pd–Ni active site distance in Pd–Ni–P nanocatalysts

Incorporating oxophilic metals into noble metal-based catalysts represents an emerging strategy to improve the catalytic performance of electrocatalysts in fuel cells. However, effects of the distance between the noble metal and oxophilic metal active sites on the catalytic performance have rarely been investigated. Herein, we report on ultrasmall (∼5 nm) Pd-Ni-P ternary nanoparticles for ethan...

متن کامل

Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media

Palladium nanoparticles supported on multi-walled carbon nanotubes (Pd/MWCNTs) have been synthesized using a modified polyol reduction method and its performance in methanol oxidation reactions has evaluated. The morphology of palladium on MWCNTs was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The catalytic performance of synthesized catalyst ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010