Thermogravimetric analysis of aluminised E-glass fibre reinforced unsaturated polyester composites
نویسنده
چکیده
Novel aluminised E-glass fibre reinforced unsaturated polyester composites, originally formulated for enhanced thermal and electrical shielding properties were evaluated in terms of their thermal performance. The thermal degradation of these specimens was analysed using a thermogravimetric analyser (TGA). The samples were heated from ambient temperature to 500 1C at a heating rate of 20 1C/min. All specimens were decomposed under dry nitrogen (N2) at a flow rate of 40ml/min to yield gases and solid char. Aluminised E-glass composites were compared alongside the unmetallised E-glass and unreinforced composite. The major weight loss occurred between 200 and 400 1C. The unreinforced polyester had a maximum weight loss, 1.25%/1C, occurring at 360 1C. For the aluminised and unmetallised E-glass composites, the maximum rate of weight loss was 0.34 and 0.55%/1C, respectively. Experimental results show the degradation of the aluminised E-glass composites obtained from TGA tests is higher compared to those of unmetallised E-glass fibre and unreinforced polyester composite. This improvement is correlated to the aluminium coating. r 2006 Elsevier Ltd. All rights reserved.
منابع مشابه
Mechanical and Impact Properties of Untreated Jute Fabric Reinforced Polyester Laminates Compared with Different E- Glass Fibre Reinforced Laminates
In recent years, the improvement of properties of natural fibre reinforced laminates over the pure polymeric matrix has been thoroughly investigated with the aim of providing a possible replacement of E-glass fibre reinforced composites for some large-volume applications. In the present study, the properties of a jute/polyester laminate are compared with those yielded by two E-glass fibre woven...
متن کاملEffect of Strain Rate on the Tensile Failure of Woven Reinforced Polyester Resin Composites
Tensile stress-strain curves a r e obtained at s t rain rates of %lo-'+, ~ 1 0 and c1000/s for carbon, Kevlar and glass fibre woven-reinforced polyester resin compos i tes and the variation of modulus, tensile strength and fracture strain with strain rate is determined. A change in the failure mode at the highest strain rates is observed for the glass but not the carbon or Kevlar reinforced com...
متن کاملEffect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites
Hemp fibre reinforced unsaturated polyester composites (HFRUPE) were subjected to water immersion tests in order to study the effects of water absorption on the mechanical properties. HFRUPE composites specimens containing 0, 0.10, 0.15, 0.21 and 0.26 fibre volume fraction were prepared. Water absorption tests were conducted by immersing specimens in a de-ionised water bath at 25 C and 100 C fo...
متن کاملAccuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites
The present study introduces two quantitative parameters to compare the accuracy of ultrasonic C-scan testing and X-ray radiography methods in the damaged area detection under low-velocity impact in polymer-based composites. For this purpose, the hand lay-up technique of composite processing was employed to prepare the composite specimen. A composite specimen consisting of the glass fiber reinf...
متن کاملTensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades
Recently, there has been a fast growth in research and investigation in the natural fibre composite due to the advantages of these materials, such us low environmental impact, low cost and good mechanical properties compared to synthetic fibre composites. Much effort has gone into increasing the mechanical performance and applications of natural fibes. This paper examines the mechanical propert...
متن کامل