56F8300 Hybrid Controller Used in Control of Electro-Mechanical Brake
نویسنده
چکیده
Electro-mechanical braking systems (see [9], References), also referred to as brake by-wire, replace conventional hydraulic braking systems with a completely dry electrical component system. This occurs by replacing conventional actuators with electric motor-driven units. This move to electronic control eliminates many of the manufacturing, maintenance, and environmental concerns associated with hydraulic systems.
منابع مشابه
Hydraulic anti-lock, anti-skid braking system using fuzzy controller
To maintain the stability trajectory of vehicles under critical driving conditions, anti lock-anti skid controllers, consisting of four anti-lock sub-controllers for each wheel and two anti-skid sub-controllers for left and right pair wheels have been separately designed. Wheel and body systems have been simulated with seven degrees of freedom to evaluate the proper functioning of controllers. ...
متن کاملVelocity Control of Electro Hydraulic Servo System by Tracking Method
This paper proposes an efficient Tracking method for velocity control of an electro-hydraulic servo system (EHSS) in the presence of flow nonlinearities and internal friction. The tracking method controller is a kind of feedback error learning structure. In the proposed method, the Feedback Error Learning (FEL) algorithm is used to control the velocity. There is no need to compute the system ja...
متن کاملAn Investigation on the Effect of Using Regenerative Braking System on Energy Consumption Reduction of Hybrid Vehicles Based on Tehran City Driving Cycle
In driving and when you brake, a lot of energy is dissipated to stop the car; especially in urban areas where the vehicle is driving in a stop-and-go pattern. This energy, which is dissipated by the brake pads, can be stored in the vehiclechr('39')s battery. In Hybrid and Electric Vehicles, a regenerative brake can be used alongside the mechanical brakes to regenerate some energy while braking....
متن کاملHybrid Electric Vehicle Brake System Control Metrics Design and Application
There are several kinds of metrics should be handled by the brake system of hybrid electric vehicles such as fuel economy, performance and safety. The optimal control of the HEV brake system will be solved by a modelbased approach. Based on the developed vehicle model, a two phase approach is proposed for the coordinated control of the HEV brake system. A high level sliding mode controller is a...
متن کاملFuel consumption optimization of a series hybrid electric vehicle utilizing fuzzy logic control
The controller of the hybrid electric vehicle determines the combustion engine start-stop time, the operation points, and regenerative brake energy. The Controlling approach of hybrid electric vehicles controls the amount of needed fuel in every driving situation. In the present study, the thermostat strategy is implemented along with fuzzy logic control and compared to the classic thermostat s...
متن کامل