Highly low resistance and transparent NiÕZnO ohmic contacts to p-type GaN
نویسندگان
چکیده
We report on a promising Ni ~5 nm!/Al-doped ZnO ~AZO! ~450 nm! metallization scheme for low resistance and transparent ohmic contacts to p-GaN (5310 cm). It is shown that the as-deposited Ni/AZO contact shows a nonohmic characteristic due to the insulating nature of the as-deposited AZO. However, annealing the contacts at 450 and 550 °C for 2 min in air ambient results in linear current–voltage characteristics, giving a specific contact resistance of 1.01 310 and 8.46310 V cm, respectively. It is further shown that annealing the contact at 550 °C for 5 min produces a specific contact resistance of 6.23310 V cm. The light transmittance of the contacts annealed at 550 °C for 2 min is measured to be higher than 76% at wavelengths in the range of 400–550 nm. It is shown that the Ni/AZO contact could be a suitable scheme for high-performance optical devices. © 2003 American Institute of Physics. @DOI: 10.1063/1.1591236#
منابع مشابه
INTEGRATION OF N- AND P-CONTACTS TO GaN-BASED LIGHT EMITTING DIODES
Low-resistance Ohmic contacts are essential for the fabrication of electrical devices. While low contact resistance has been achieved to p-type layers or n-type layers separately, contacts are likely to degrade when both types need to be integrated into a single fabrication process, in particular when prior mesa etching is required. We present a solution to the problem, resulting in low-resista...
متن کاملImproved Low Resistance Contacts of Ni/Au and Pd/Au to p-Type GaN Using a Cryogenic Treatment
A low resistance Ohmic contact to p-type GaN is essential for reliable operation of electronic and optoelectronic devices. Such contacts have been made using Ni/Au and Pd / Au contacts to p-type Mg-doped GaN (1.41x10 cm) grown by metalorganic chemical vapor deposition ( MOCVD ) on ( 0001 ) sapphire substrates. Thermal evaporation was used for the deposition of those metals followed by annealing...
متن کاملCharacterization of Pd/Ni/Au ohmic contacts on p-GaN
A low-resistance ohmic contact to Mg-doped p-type GaN grown by metal-organic chemical vapor deposition (MOCVD) with a carrier concentration of 2 · 10 cm 3 using Pd/Ni/Au metallization was formed. An anneal at 500 C for 1 min in a flowing N2 ambient produced an excellent ohmic contact with a specific contact resistivity as low as 2.4 · 10 5 X cm. X-ray photoelectron spectroscopy (XPS) and Auger ...
متن کاملTwo-step deposition of Al-doped ZnO on p-GaN to form ohmic contacts
Al-doped ZnO (AZO) thin films were deposited directly on p-GaN substrates by using a two-step deposition consisting of polymer assisted deposition (PAD) and atomic layer deposition (ALD) methods. Ohmic contacts of the AZO on p-GaN have been formed. The lowest sheet resistance of the two-step prepared AZO films reached to 145 Ω/sq, and the specific contact resistance reduced to 1.47 × 10-2 Ω·cm2...
متن کاملLow-resistance and high-transparency Ni/indium tin oxide ohmic contacts to p-type GaN
Related Articles Heat-induced damping modification in yttrium iron garnet/platinum hetero-structures Appl. Phys. Lett. 102, 062417 (2013) Extraordinary magnetoresistance in two and three dimensions: Geometrical optimization J. Appl. Phys. 113, 064505 (2013) Improved chemical and electrical stability of gold silicon contacts via epitaxial electrodeposition J. Appl. Phys. 113, 063708 (2013) Carri...
متن کامل