Realizing Full Coverage of Stable Perovskite Film by Modified Anti-Solvent Process
نویسندگان
چکیده
Lead-free solution-processed solid-state photovoltaic devices based on formamidinium tin triiodide (FASnI3) and cesium tin triiodide (CsSnI3) perovskite semiconductor as the light harvester are reported. In this letter, we used solvent engineering and anti-solvent dripping method to fabricate perovskite films. SnCl2 was used as an inhibitor of Sn4+ in FASnI3 precursor solution. We obtained the best films under the function of toluene or chlorobenzene in anti-solvent dripping method and monitored the oxidation of FASnI3 films in air. We chose SnF2 as an additive of CsSnI3 precursor solution to prevent the oxidation of the Sn2+, improving the stability of CsSnI3. The experimental results we obtained can pave the way for lead-free tin-based perovskite solar cells (PSCs).
منابع مشابه
Ultra-high open-circuit voltage of perovskite solar cells induced by nucleation thermodynamics on rough substrates
To obtain high performance CH3NH3PbI3 perovskite solar cells, it is highly important to realise a high open-circuit voltage. Calculation results based on a modified diode model have indicated that a low bare ratio ϕ of the perovskite film is the most important factor determining the open-circuit voltage, where ϕ is defined as the ratio of the projection of the uncovered area of the perovskite f...
متن کاملEffects of Process Parameters on the Characteristics of Mixed-Halide Perovskite Solar Cells Fabricated by One-Step and Two-Step Sequential Coating
In this paper, two-step sequential spin-dip and spin-spin coating, as well as one-step spin coating, methods are used to fabricate methylammonium lead mixed-halide perovskites to study the effect of process parameters, including the choice of the solvent, annealing temperature, spin velocity, and dipping time on the characteristics of the perovskite film. Our results show that using a mixture o...
متن کاملFilm-through large perovskite grains formation via a combination of sequential thermal and solvent treatment
"Film-through large perovskite grains formation via a combination of sequential thermal and solvent treatment" (2016). Organic–inorganic halide perovskites have recently attracted strong research interest for fabrication of high-performance, low-cost photovoltaic devices. Recently, we reported a highly reproducible procedure to fabricate high-performance organic–inor-ganic halide perovskite sol...
متن کاملA solution-processed bathocuproine cathode interfacial layer for high-performance bromine-iodine perovskite solar cells.
Perovskite film generally has rough surface morphology due to the voids between the grain domains. Smoothed interface contact between the perovskite layer and the top electrode is critical for planar perovskite solar cells. We reported high efficiency bromine-iodine based perovskite solar cells with a flattening cathode interface by incorporating a solution-processed bathocuproine (sBCP) interf...
متن کاملNucleation mediated interfacial precipitation for architectural perovskite films with enhanced photovoltaic performance.
Perovskite films are a promising candidate for future highly efficient and low-cost solar cells. The long diffusion length of charge carriers in the perovskite film makes its architecture fabrication seem unnecessary, while the rapid crystallization process increases the difficulty in its architecture fabrication. Here we show the fabrication of perovskite architectures through a nucleation med...
متن کامل