A Mini Axial and a Permanent Maglev Radial Heart Pump§
نویسندگان
چکیده
The implantability and durability have been for decades the focus of artificial heart R&D. A mini axial and a maglev radial pump have been developed to meet with such requirements.The mini axial pump weighing 27g (incl.5g rotor) has an outer diameter of 21mm and a length of 10mm in its largest point, but can produce a maximal blood flow of 6l/min with 50mmHg pressure increase. Therefore, it is suitable for the patients of 40-60kg body weight. For other patients of 60-80kg or 80-100kg body weight, the mini axial pumps of 23mm and 25mm outer diameter had been developed before, these devices were acknowledged to be the world smallest LVADs by Guinness World Record Center in 2004.The permanent maglev radial pump weighing 150g is a shaft-less centrifugal pump with permanent magnetic bearings developed by the author. It needs no second coil for suspension of the rotor except the motor coil, different from all other maglev pumps developed in USA, Japan, European, etc. Thus no detecting and controlling systems as well as no additional power supply for maglev are necessary. The pump can produce a blood flow up to as large as 10l/min against 100mmHg pressure.An implantable and durable blood pump will be a viable alternative to natural donor heart for transplantation.
منابع مشابه
An Implantable Ventricular Assist System Employing a Radially Controlled Maglev Centrifugal Blood Pump with Capability to Measure Blood Flow Rate without Additional Sensors
In order to solve the problems of lack of heart donors for transplant, implantable ventricular assist systems (VAS) have been developed to assist the failing heart ventricle. One of the components of a VAS is a blood pump that connects the left ventricle to the aorta. Therefore, the pump flow rate is influenced by the cardio-vascular system. To control the flow rate through the blood pump, real...
متن کاملOptimization of a Hybrid Magnetic Bearing for a Magnetically Levitated Blood Pump via 3-D FEA.
In order to improve the performance of a magnetically levitated (maglev) axial flow blood pump, three-dimensional (3-D) finite element analysis (FEA) was used to optimize the design of a hybrid magnetic bearing (HMB). Radial, axial, and current stiffness of multiple design variations of the HMB were calculated using a 3-D FEA package and verified by experimental results. As compared with the or...
متن کاملNew concepts and new design of permanent maglev rotary artificial heart blood pumps.
According to tradition, permanent maglev cannot achieve stable equilibrium. The authors have developed, to the contrary, two stable permanent maglev impeller blood pumps. The first pump is an axially driven uni-ventricular assist pump, in which the rotor with impeller is radially supported by two passive magnetic bearings, but has one point contact with the stator axially at standstill. As the ...
متن کاملDesign and analysis of a magnetically levitated axial flux BLDC motor for a ventricular assist device (VAD)
This study presents the design of a magnetically levitated (maglev) axial magnetic flux brushless direct current motor (AF-BLDC) for an axial blood flow ventricular assist device (VAD). It has three phases, twelve salient stator poles, and eight rotor magnet poles. It is designed in miniature size. Twin AF-BLDC motors are placed in the VAD symmetrically and rotors are coupled to the pump from t...
متن کاملModeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine
High-speed maglev train is considered an ideal vehicle in the 21st Century, as an important part of the train, the travel mechanism bears and delivers a variety of vertical and horizontal alternating load in operation, it affects the operation safety of the train directly, so key components of the travel mechanism should under fatigue strength test by fatigue test machine.The paper proposed a v...
متن کامل