Heat Transfer and Flow Measurements on a One- Scale Gas Turbine Can Combustor Model
نویسندگان
چکیده
................................................................................................. ii ACKNOWLEDGEMENTS .............................................. .................................. iv LIST OF FIGURES ....................................................... ................................ viii NOMENCLATURE ......................................................................................... x CHAPTER 1: INTRODUCTION .......................................................................... 1 1.1 Liner Wall Cooling Systems .................................................................. 3 1.2 Pollutant Emissions ............................................................................. 5 1.3 Solar Dry Low Emission (DLE) Combustor ................................................ 8 1.4 Focused Cooling ...............................................................................10 1.5 Swirler .......................................................................................... 12 1.6 Literature Survey .............................................................................. 13 1.7 Experimental Objectives ..................................................................... 15 CHAPTER 2: EXPERIMENTAL APPARATUS ...................................................... 17 2.1 Transient condition experiment setup ...................................................... 17 2.2 Steady-State condition experiment setup ................................................... 18 2.2.1 Inlet air supply ..................................................................... 18 2.2.2 Swirler ............................................................................... 19
منابع مشابه
Influence of Thermal Radiation Models on Prediction of Reactive Swirling Methane/Air Flame in a Model Gas Turbine Combustor
A numerical simulation of reactive swirling methane/air non-premixed flame in a new three-dimensional model combustion chamber is carried out to assess the performance of two thermal radiation models, namely, the Discrete Transfer Radiation Model and the P-1 Model. A Finite Volume staggered grid approach is employed to solve the governing equations.The second-order upwind scheme is applied for...
متن کاملFlow and Thermal Performance of a Leading Edge Endwall-airfoil Fillet for a Gas Turbine Nozzle Guide Vane
Gas turbine engines have a high power-to-weight ratio, making them ideal for generation of aircraft thrust, and can have excellent electrical power generation efficiencies when used in a combined cycle power plant. A complex vortical flow at the junction of the nozzle guide vane airfoil and its casing (endwall) in the turbine section tends to decrease aerodynamic efficiency and increase metal t...
متن کاملEndwall Heat Transfer and Shear Stress for a Nozzle Guide Vane with Fillets and a Leakage Interface
Increasing the combustion temperatures in a gas turbine engine to achieve higher efficiency and power output also results in high heat loads to turbine components downstream of the combustor. The challenge of adequately cooling the nozzle guide vane directly downstream of the combustor is compounded by a complex vortical secondary flow at the junction of the endwall and the airfoil. This flow t...
متن کاملAfrl-pr-wp-tp-2006-243 Experimental Evaluation of an Inlet Profile Generator for High Pressure Turbine Tests
Improving the performance and durability of gas turbine aircraft engines depends highly on achieving a better understanding of the flow interactions between the combustor and turbine sections. The flow exiting the combustor is very complex and it is characterized primarily by elevated turbulence and large variations in temperature and pressure. The heat transfer and aerodynamic losses that occu...
متن کامل