Application of a handheld Pressure Application Measurement device for the characterisation of mechanical nociceptive thresholds in intact pig tails
نویسندگان
چکیده
The assessment of nociceptive thresholds is employed in animals and humans to evaluate changes in sensitivity potentially arising from tissue damage. Its application on the intact pig tail might represent a suitable method to assess changes in nociceptive thresholds arising from tail injury, such as tail docking or tail biting. The Pressure Application Measurement (PAM) device is used here for the first time on the tail of pigs to determine the reliability of the methods and to provide novel data on mechanical nociceptive thresholds (MNT) associated with four different age groups (9, 17, 24 and 32weeks) and with proximity of the target region to the body of the animal. We recorded an overall acceptable level of intra-individual reliability, with mean values of CV ranging between 30.1 and 32.6%. Across all age groups, the first single measurement of MNT recorded at region 1 (proximal) was significantly higher (P<0.05) than the following two. This was not observed at tail regions 2 and 3 (more distal). Age had a significant effect (P<0.05) on the mean thresholds of nociception with increasing age corresponding to higher thresholds. Furthermore, a significant effect of proximity of tail region to the body was observed (P<0.05), with MNT being higher in the proximal tail region in pigs of 9, 17 and 24weeks of age. There was also a significant positive correlation (P<0.05) between mechanical nociceptive thresholds and age/body size of the animals. To the best of our knowledge, no other investigation of tail nociceptive thresholds has been performed with the PAM device or alternative methods to obtain mechanical nociceptive thresholds in intact tails of pigs of different age/body size. The reliability of the data obtained with the PAM device support its use in the measurement of mechanical nociceptive threshold in pig tails. This methodological approach is possibly suitable for assessing changes in tail stump MNTs after tail injury caused by tail docking and biting.
منابع مشابه
Studying the Mechanical Behavior of Tissue in the Generation of Pressure Sores using Simulation and a Guinea Pig Experimental Model
Introduction: Pressure sores refer to lesions that are produced while a constant pressure causes necrotic tissue to grow. The need for a better comprehension of the process has led researchers to artificial generation of pressure sores. Modeling the mechanical behavior of tissue will provide a better understanding of this process as well as a more suitable selection ...
متن کاملValidation of a Modified Algometer to Measure Mechanical Nociceptive Thresholds in Awake Dogs
This study was conducted to validate the use of a modified algometer device to measure mechanical nociceptive thresholds in six dogs. Dogs were administered morphine intravenously (IV) at 1 mg/kg or saline at equivolume in a crossover design with one-week washout period. Mechanical nociceptive thresholds were determined before, after the administration of treatments at 5 minutes, and hourly for...
متن کاملNon-thermal atmospheric pressure plasma source design and construction using Argon as the working gas for wound healing
In this research, a non-thermal atmospheric pressure plasma jet device was constructed for skin wound treatment. For this reason, five mice were treated for five consecutive days for 30 s, in a daily manner. Natural wound healing time was monitored and compared with the treated one in 12 consecutive days. The measurement of voltage, current and power waveforms of the plasma source, the optical ...
متن کاملApplication of Pulse Method to Incremental Slitting Measurement of Residual Stresses in Laminated Composites
In this research, the incremental slitting method was employed to determine throughthickness residual stress profile of a carbon/epoxy laminate. The method involves measuring strains at the back surface of the stressed specimen, while a narrow slit is cut by a CNC milling machine progressively from the top surface of the specimen. "Pulse Method" was selected as the computational approach for th...
متن کاملApplication of Malmquist Index in Two-Stage DEA for Measurement of Productivity Growth
The purpose of this paper is to develop an output oriented methodology for calculating productivity growth by using Malmquist productivity index (MPI) and two different data envelopment analysis (DEA) views (optimistic and pessimistic) simultaneously, and apply it to five Iranian Commercial Banks over the four time period (2009-2013). Consequently, we have proposed a new approach called the dou...
متن کامل