Evaluation of titanium ultralight manual wheelchairs using ANSI/ RESNA standards.
نویسندگان
چکیده
Comfortable propulsion and support, light weight, and small dimensions are important features that help preserve upper-limb integrity of manual wheelchair users and improve accessibility. The titanium wheelchair is a product developed in response to these goals, but none of the test results of titanium wheelchairs had been disclosed before this study was performed. We hypothesized that these titanium wheelchairs would be in compliance with American National Standards Institute (ANSI)/Rehabilitation Engineering and Assistive Technology Society of North America (RESNA) standards. We tested 12 ultralight titanium rigid-frame wheelchairs (4 models) using ANSI/RESNA testing procedures and compared the test results with previously tested ultralight and lightweight aluminum wheelchairs. All wheelchairs passed the forward braking effectiveness test, but eight wheelchairs tipped backward before inclining to 7 degrees in the rearward braking effectiveness test. All wheelchairs passed the impact strength tests, but six wheelchairs failed in the static strength tests. Three wheelchairs successfully completed the fatigue tests, but the remaining wheelchairs failed prematurely. This group of titanium wheelchairs had less equivalent cycles and value than the ultralight aluminum wheelchairs that were tested in a previous study. The failure modes revealed important design issues of each model. Our results suggest that manufacturers may need to perform more careful analyses before commercializing new products.
منابع مشابه
Evaluation of aluminum ultralight rigid wheelchairs versus other ultralight wheelchairs using ANSI/RESNA standards.
Previous studies found that select titanium ultralight rigid wheelchairs (TURWs) had fewer equivalent cycles and less value than select aluminum ultralight folding wheelchairs (AUFWs). The causes of premature failure of TURWs were not clear because the TURWs had different frame material and design than the AUFWs. We tested 12 aluminum ultralight rigid wheelchairs (AURWs) with similar frame desi...
متن کاملJRRD at a Glance for Volume 45, Number 9, 2008
We tested a series of commercially available titanium ultralight wheelchairs using American National Standards Institute (ANSI)/ Rehabilitation Engineering and Assistive Technology Society of North America (RESNA) testing procedures to compare their durability with previously tested aluminum ultralight wheelchairs and lightweight wheelchairs. Three of each of the following titanium wheelchairs ...
متن کاملEvaluation of lightweight wheelchairs using ANSI/RESNA testing standards.
Lightweight wheelchairs are characterized by their low cost and limited range of adjustment. Our study evaluated three different folding lightweight wheelchair models using the American National Standards Institute/Rehabilitation Engineering Society of North America (ANSI/RESNA) standards to see whether quality had improved since the previous data were reported. On the basis of reports of incre...
متن کاملLife-cycle analysis of depot versus rehabilitation manual wheelchairs.
The proper selection of a wheelchair requires making several critical decisions, not the least of which is what type of wheelchair is appropriate. The International Organization for Standards (ISO) continues to develop and refine wheelchair standards. Standards allow the objective comparison of products from various sources, permitting consumers or clinicians to assess wheelchairs with which th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of rehabilitation research and development
دوره 45 9 شماره
صفحات -
تاریخ انتشار 2008