Van der Waals metal-semiconductor junction: Weak Fermi level pinning enables effective tuning of Schottky barrier.
نویسندگان
چکیده
Two-dimensional (2D) semiconductors have shown great potential for electronic and optoelectronic applications. However, their development is limited by a large Schottky barrier (SB) at the metal-semiconductor junction (MSJ), which is difficult to tune by using conventional metals because of the effect of strong Fermi level pinning (FLP). We show that this problem can be overcome by using 2D metals, which are bounded with 2D semiconductors through van der Waals (vdW) interactions. This success relies on a weak FLP at the vdW MSJ, which is attributed to the suppression of metal-induced gap states. Consequently, the SB becomes tunable and can vanish with proper 2D metals (for example, H-NbS2). This work not only offers new insights into the fundamental properties of heterojunctions but also uncovers the great potential of 2D metals for device applications.
منابع مشابه
Fermi-Level Pinning by Misfit Dislocations at GaAs Interfaces
Fermi-level pinning by misfit dislocations at GaAs interfaces has been investigated. n -GaInAs was used to control the misfit dislocation density by varying of composition and epilayer thickness. interfaces with zero or low dislocation densities are Ohmic to current flow, and become rectifying with increasing dislocation density. The "Schottky barrier height" increases with dislocation density ...
متن کاملSchottky barriers: An effective work function model
The experimental observations of metallurgical interactions between compound semiconductor substrates and metallic or oxide overlayers have stimulated a new model of Fermi level "pinning" at these interfaces. This model assumes the standard Schottky picture of interface band alignment, but that the interface phases involved are not the pure metal or oxide normally assumed by other models. For b...
متن کاملComputational Study of Metal Contacts to Monolayer Transition-Metal Dichalcogenide Semiconductors
Among various 2D materials, monolayer transition-metal dichalcogenide (mTMD) semiconductors with intrinsic band gaps (1–2 eV) are considered promising candidates for channel materials in next-generation transistors. Low-resistance metal contacts to mTMDs are crucial because currently they limit mTMD device performances. Hence, a comprehensive understanding of the atomistic nature of metal conta...
متن کاملSchottky barrier heights of metal contacts to n-type gallium nitride with low-temperature-grown cap layer
The Schottky barrier heights of metal contacts, including WSi0.8, Cr, Ti, Pt, and Ni, on n-type gallium nitride GaN with a GaN cap layer grown at low-temperature LTG were studied. Higher barriers can be formed by introducing LTG GaN on top of the conventional structures. The higher Schottky barrier observed in samples with the LTG GaN cap layer may be due to the facts that the high-resistivity ...
متن کاملInhomogeneous Ni/Ge Schottky barriers due to variation in Fermi-level pinning
To achieve high performance Ge nMOSFETs it is necessary to reduce the metal/semiconductor Schottky barrier heights at the source and drain. Ni/Ge and NiGe/Ge Schottky barriers are fabricated by electrodeposition using n-type Ge substrates. Current (I)–voltage (V) and capacitance (C)–voltage (V) and low temperature I–V measurements are presented. A high-quality Schottky barrier with extremely lo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Science advances
دوره 2 4 شماره
صفحات -
تاریخ انتشار 2016