A class of complementary IIR filters
نویسندگان
چکیده
A class of complementary IIR filters is introduced. One of these filters can be realized as a tapped cascaded interconnection of identical allpass subfilters. The complementary filter is then obtained automatically by adding some extra allpass subfilters and a subtractor. The proposed filters are always allpass complementary and, under certain conditions, also magnitude complementary. Further, in terms of the frequency selectivity, they exhibit properties similar to those of complementary linear-phase FIR filters. These properties are retained also after coefficient quantization. The design of the filters is divided into design of a prototype FIR filter and a prototype IIR filter being realizable as a parallel connection of two allpass filters. Design examples are included for demonstration.
منابع مشابه
Design of IIR Digital Filter using Modified Chaotic Orthogonal Imperialist Competitive Algorithm (RESEARCH NOTE)
There are two types of digital filters including Infinite Impulse Response (IIR) and Finite Impulse Response (FIR). IIR filters attract more attention as they can decrease the filter order significantly compared to FIR filters. Owing to multi-modal error surface, simple powerful optimization techniques should be utilized in designing IIR digital filters to avoid local minimum. Imperialist compe...
متن کاملLow latency IIR digital filter design by using metaheuristic optimization algorithms
Filters are particularly important class of LTI systems. Digital filters have great impact on modern signal processing due to their programmability, reusability, and capacity to reduce noise to a satisfactory level. From the past few decades, IIR digital filter design is an important research field. Design of an IIR digital filter with desired specifications leads to a no convex optimization pr...
متن کاملInvestigation of computationally efficient complementary IIR filter pairs with tunable crossover frequency
This paper concentrates on the computationally efficient implementation of three classes of complementary IIR filter pairs with tunable crossover frequency. Class I denotes the IIR filter pair implemented as a parallel connection of two all-pass filters, whereas Class II (Class III) stands for the tapped cascaded interconnection of two distinct all-pass filters. We propose new tuning formulae f...
متن کاملAdaptive Line Enhancement Using a Parallel IIR Filter with A Step-By-step Algorithm
A step-by-step algorithm for enhancement of periodic signals that are highly corrupted by additive uncorrelated white gausian noise is proposed. In each adaptation step a new parallel second-order section is added to the previous filters. Every section has only one adjustable parameter, i.e., the center frequency of the self-tuning filter. The bandwidth and the convergence factor of each secti...
متن کاملPower-complementary Iir Filter Pairs with an Adjustable Crossover Frequency
Complementary infinite-impulse response (IIR) filter pairs can be synthesized to generate power-complementary, allpass complementary, or magnitude-complementary filter pairs (see, e.g., [1]). A very attractive alternative to generate a power-complementary low-pass/high-pass IIR filter pair is to use lattice wave digital (LWD) filters (parallel connections of two all-pass filters) [2]–[4]. Usual...
متن کامل