Microstrip Wideband Bandpass Filter Based on Square Ring Loaded Resonator
نویسندگان
چکیده
Abstract—In this paper, a compact microstrip wideband bandpass filter (BPF) based on square ring loaded resonator (SRLR) is proposed. The SRLR is formed by loading a pair of bent open-stubs outside the diagonal corners of a square ring, which generates three split degenerated modes. The first two split modes form a dominant wideband passband. By introducing another pair of loaded open-stubs, the third split mode is moved into the passband to achieve an extra bandwidth for the wideband passband. Measured results show that this proposed BPF has a 3 dB fractional bandwidth of 69%, and the insertion loss of the BPF is less than 1.0 dB.
منابع مشابه
A Compact Ultra-Wideband Bandpass Filter with Sharp-Rejection using Complementary Split Ring Resonators
A compact and sharp-rejection ultra-wideband (UWB) microstrip band-pass filter (BPF) is developed using of left handed metamaterials realized by complementary split ring resonator (CSRR). Moreover, proposed structure consists of two doublets parallel coupling gaps at each side of a microstrip ring. In comparison with some other filters, this structure shows a significantly wider passband due to...
متن کاملNovel Band-Notched UWB Bandpass Filter Using Microstrip/Slotline Ring Resonators
A novel ultra-wideband (UWB) bandpass filter (BPF) with notched band based on microstrip/slotline ring resonators is presented in this paper. The UWB BPF is fabricated with two microstrip ring resonators on the top copper layer and a slotline ring resonator on the bottom ground layer. Thus, an ultra-wide passband can be achieved owing to the coupling effects and microstrip/slotline transitions ...
متن کاملA Compact Ultra-Wideband Filter Based on Left Handed Transmission Line by Using Complementary Split Ring Resonators and Series Capacitor
A compact and sharp rejection UWB microstrip bandpass filter is developed using left handed metamaterials. For realizing a backward-wave propagation medium, two split ring resonator (CSRR) in the back substrate side and also one series capacitor etched in the host line, are used to produce a negative effective ε and μ, simultaneously. Moreover, in the proposed structure, two doublets parallel c...
متن کاملA Wideband Differential Bandpass Filter Based on T-shaped Stubs and Single Ring Resonator
A wideband differential bandpass filter (BPF) with differential mode passband and common mode suppression is proposed and implemented on microstrip lines for wideband application in this letter. The initial BPF is similar to a single ring resonator with two unequal feed lines which have 180◦ separation and T-shaped stubs are loaded on the ring resonator to form an improved one for better perfor...
متن کاملCompact Microstrip Uwb Bandpass Filter with Triple-notched Bands
A new microstrip ultra-wideband (UWB) bandpass filter (BPF) with triple-notched bands is presented in this paper. The circuit topology and its corresponding electrical parameters of the initial microstrip UWB BPF are desired by a variation of genetic algorithm (VGA). Then, triple-notched bands inside the UWB passband are implemented by coupling a square ring short stub loaded resonator (SRSSLR)...
متن کامل