New High Capacity Cathode Materials for Rechargeable Li-ion Batteries: Vanadate-Borate Glasses
نویسندگان
چکیده
V2O5 based materials are attractive cathode alternatives due to the many oxidation state switches of vanadium bringing about a high theoretical specific capacity. However, significant capacity losses are eminent for crystalline V2O5 phases related to the irreversible phase transformations and/or vanadium dissolution starting from the first discharge cycle. These problems can be circumvented if amorphous or glassy vanadium oxide phases are employed. Here, we demonstrate vanadate-borate glasses as high capacity cathode materials for rechargeable Li-ion batteries for the first time. The composite electrodes of V2O5 - LiBO(2) glass with reduced graphite oxide (RGO) deliver specific energies around 1000 Wh/kg and retain high specific capacities in the range of ~ 300 mAh/g for the first 100 cycles. V2O5 - LiBO(2) glasses are considered as promising cathode materials for rechargeable Li-ion batteries fabricated through rather simple and cost-efficient methods.
منابع مشابه
High-capacity micrometer-sized Li2S particles as cathode materials for advanced rechargeable lithium-ion batteries.
Li(2)S is a high-capacity cathode material for lithium metal-free rechargeable batteries. It has a theoretical capacity of 1166 mAh/g, which is nearly 1 order of magnitude higher than traditional metal oxides/phosphates cathodes. However, Li(2)S is usually considered to be electrochemically inactive due to its high electronic resistivity and low lithium-ion diffusivity. In this paper, we discov...
متن کاملComparison of Lithium-ion Battery Cathode Materials and the Internal Stress Development
The need for development and deployment of reliable and efficient energy storage devices, such as lithium-ion rechargeable batteries, is becoming increasingly important due to the scarcity of petroleum. Lithium-ion batteries operate via an electrochemical process in which lithium ions are shuttled between cathode and anode while electrons flowing through an external wire to form an electrical c...
متن کاملUnderstanding and Controlling Anionic Electrochemical Activity in High-Capacity Oxides for Next Generation Li-Ion Batteries
Rechargeable Li-ion batteries with higher energy density are in urgent demand to address the global challenge of energy storage. In comparison with anode materials, the relatively low capacity of cathode oxides, which exhibit classical cationic redox activity, has become one of the major bottlenecks to reach higher energy density. Recently, anionic activity, such as oxygen redox reaction, has b...
متن کاملSnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملTuning of voltage and cycle performance of organic-tailored rechargeable battery by organic chemical technique
Organic chemistry plays an important role in the development of high-performance rechargeable batteries exceeding Li-ion batteries using LiCoO2 as a cathode-active material. The authors implemented the high-capacity rechargeable batteries using trioxotriangulene (TOT) stable neutral radicals with four-stage redox ability as cathode-active materials. These batteries showed the capacity of 311 A ...
متن کامل