THE INFLUENCE OF REPAIR WELDED JOINT ON THE LIFE OF STEAM PIPELINE MADE OF Cr-Mo STEEL SERVICED BEYOND THE CALCULATED WORKING TIME WPŁYW NAPRAWCZEGO ZŁĄCZA SPAWANEGO NA TRWAŁOŚĆ RUROCIĄGU PARY ZE STALI Cr-Mo EKSPLOATOWANEGO POWYŻEJ OBLICZENIOWEGO CZASU PRACY

نویسنده

  • A. ZIELIŃSKI
چکیده

The aim of the paper was to examine the influence of repair welded joints on the service life of steam pipelines for over 220 000 hours of service in creep conditions. The research included the study of the microstructure using scanning microscopy, the tests on mechanical properties at room and elevated temperature, determining the nil ductility transition temperature, and short-time creep tests to determine the residual life of the material. The tests allowed determining the time of further safe operation of elements of the steam pipeline with a repair welded joint, with reference to the base material, and the welded joint after service. The assessment of residual life and disposable residual life, and at the same time determining the possible time of further safe operation, has an essential meaning in the case of elements serviced considerably beyond the calculated working time.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel

The aim of the present research is to simulate the heat treatment process of the autogenous grinding (AG) shell liner of Cr-Mo steel in different quenching media (still air, air blowing, oil and water) using ABAQUS software, in order to calculate the cooling curves. In this regard, the microstructure and hardness for each arbitrary point within the mill liner's bulk could be predicted based on ...

متن کامل

NEW METHOD FOR LIFE ASSESSMENT OF 1%CR-0.5% MO LOW ALLOY STEEL ON THE BASE OF GRAIN BOUNDARY CREEP CAVITATIONS

Life assessment on the base of grain boundary creep cavitation of 1%Cr - 0.5%Mo low alloy steel has been discussed in this paper. Since microstructural degradation is one of the most important mechanisms that affects creep life, it is necessary to assess microstructural damage in order to estimate the life. Microstructural damage within the grain boundaries is a continuous phenomena starting fr...

متن کامل

Mechanism of Bainite Transformation in Fe-Cr-Mo-V-Ti-C Steel

The kinetics and mechanism of bainite transformation have been studied in Fe-Cr-Mo-V-Ti-C steel high speed dilatometry backed by thermodynamic analysis. The complete transformation of austenite, however, has not occurred at any reported temperature. Obtained results confirm the incomplete reaction phenomenon with the cessation of the bainite transformation well before the paraequilibrium is ach...

متن کامل

Modeling of Power Control of Arc Steel Melting Furnace with Fuzzy Correction of Regulation Signal

A system for arc steel melting furnace arcs power control with fuzzy corrector is proposed. Digital model of the system was created and numerical simulation under influence of deterministic and random disturbances of arc lengths were conducted. Results of simulations are shown, which prove improvements of dynamic and static indices of arc power regulation. Streszczenie. Praca przedstawia system...

متن کامل

Effect of bonding time on microstructure and mechanical properties during TLP bonding of nickel-base superalloys Hastelloy C276 and Stainless Steel AISI316

Joining of Hastelloy C276 nickel-base superalloy to AISI316 Stainless Steel using BNi-2 interlayer performed by transient liquid phase process (TLP) at 1150°C for 5 and 30 minutes. Bonding microstructure was studied using an Optical microscope and a scanning electron microscope (SEM). Vickers hardness test and shear strength test have been used to evaluate the mechanical properties. Microstruct...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015