Enhanced Passive RF-DC Converter Circuit Efficiency for Low RF Energy Harvesting
نویسندگان
چکیده
For radio frequency energy transmission, the conversion efficiency of the receiver is decisive not only for reducing sending power, but also for enabling energy transmission over long and variable distances. In this contribution, we present a passive RF-DC converter for energy harvesting at ultra-low input power at 868 MHz. The novel converter consists of a reactive matching circuit and a combined voltage multiplier and rectifier. The stored energy in the input inductor and capacitance, during the negative wave, is conveyed to the output capacitance during the positive one. Although Dickson and Villard topologies have principally comparable efficiency for multi-stage voltage multipliers, the Dickson topology reaches a better efficiency within the novel ultra-low input power converter concept. At the output stage, a low-pass filter is introduced to reduce ripple at high frequencies in order to realize a stable DC signal. The proposed rectifier enables harvesting energy at even a low input power from -40 dBm for a resistive load of 50 kΩ. It realizes a significant improvement in comparison with state of the art solutions.
منابع مشابه
Ultra-low Input Voltage Dc-dc Converter for Micro Energy Harvesting
Sensor nodes and other ultra-low power devices can be powered with micro energy harvesting. In case of low environmental power thermo generators, solar cells, inductive generators or radio frequency (RF) energy harvesting circuits provide an extremely low output voltage that needs to be increased to generate a suitable power supply. This paper presents a DC-DC converter that starts operation at...
متن کاملA Dual-band Rf Energy Harvesting Using Frequency Limited Dual-band Impedance Matching
Abstract—In this paper, a novel dual-band RF-harvesting RF-DC converter with a frequency limited impedance matching network (M/N) is proposed. The proposed RF-DC converter consists of a dual-band impedance matching network, a rectifier circuit with villard structure, a wideband harmonic suppression low-pass filter (LPF), and a termination load. The proposed dual-band M/N can match two receiving...
متن کاملEnabling Self-Powered Autonomous Wireless Sensors with New-Generation I2C-RFID Chips
A self-powered autonomous RFID device with sensing and computing capabilities is presented in this paper. Powered by an RF energy-harvesting circuit enhanced by a DCDC voltage booster in silicon-on-insulator (SOI) technology, the device relies on a microcontroller and a new generation ICRFID chip to wirelessly deliver sensor data to standard RFID EPC Class-1 Generation-2 (Gen2) readers. When th...
متن کاملDesign and Implementation of Ambient RF Energy Harvesting Circuits
This paper presents design strategies and measurements of two RF energy harvesting circuits working at UHF frequencies (around 480 MHz). Ambient RF sources are considered so for the circuit designs low power levels have been assumed. The circuits were implemented and the RF/DC conversion efficiency was measured. Index Terms – Matching network, RF energy harvesting, schottky diode, voltage doubler.
متن کاملAmbient RF Energy Harvesting Technology and its Applications
— This paper is focused on equipping wireless devices (including sensors) with novel, high efficiency circuitry to harvest and convert ambient RF power to direct current (dc). Key components of this technology are (a) miniaturized antenna and (b) high efficiency rectifying circuit. The first is responsible for capturing the RF waves, and the latter coverts the RF energy to dc. A major challenge...
متن کامل