On the Power of Logic Resynthesis

نویسندگان

  • Wei-Liang Lin
  • Amir H. Farrahi
  • Majid Sarrafzadeh
چکیده

A linear arrangement problem, called the minmax mincut problem, emerging from circuit design is investigated. Its input is a series-parallel directed hypergraph (SPDH), and the output is a linear arrangement (and a layout). The primary objective is to minimize the longest path, and the secondary objective is to minimize the cutwidth. It is shown that cutwidth D, subject to longest path minimization, is affected by two terms: pattern number k and balancing number m. Also, k and m are both lower bounds on the cutwidth. An algorithm, running in linear time, produces layouts with cutwidths D ≤ 2(k+m). There exist examples with k = Ω(N), where N is the number of vertices; however, m is always O(logN). We show that every SPDH, after local logic resynthesis (specifically, after reordering the serial paths), can be linearly placed with cutwidth D = O(logN). Simultaneously, its dual SPDH can be linearly placed with the same vertex order and with cutwidth D = O(logN). Therefore, after local resynthesis the area can be reduced by a factor of N/ logN . Application to gate-matrix layout style is demonstrated.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

SAT-Based Logic Optimization and Resynthesis

The paper develops a technology-independent optimization and post-mapping resynthesis for combinational logic networks, with emphasis on scalability and optimizing power. The proposed resynthesis (a) is capable of substantial logic restructuring, (b) is customizable to solve a variety of optimization tasks, and (c) has reasonable runtime on large industrial designs. The approach is based on sev...

متن کامل

A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System

In this paper, we present a modeling and implementation of new control schemes for an isolated photovoltaic (PV) using a fuzzy logic controller (FLC). The PV system is connected to a load through a DC-DC boost converter. The FLC controller provides the appropriate duty cycle (D) to the DC-DC converter for the PV system to generate maximum power. Using FLC controller block in MATLABTM/Simulink e...

متن کامل

Load frequency control of two-area interconnected power system using fuzzy logic control approach

Power systems are composed of power units that are constantly connected to each other and the electric power flux is constantly moving between them. All systems must be implemented in such a way that not only under normal conditions but also unwanted inputs or disturbances, are applied. It also remains stable or returns to a stable name at the earliest possible time. The fundamental factors...

متن کامل

On Using Permutation of Variables to Improve the Iterative Power of Resynthesis

Recently we have observed, that behavior of many contemporary logic synthesis and optimization processes depends on variable ordering in their input; they produce different results for different variable orderings. This fact can be exploited to escape local optima in the iterative resynthesis process, where individual synthesis and optimization steps are run repeatedly, in order to gradually im...

متن کامل

Design of Maximum Power Point Tracking in Solar Array Systems Using Fuzzy Controllers

In recent year's renewable energy sources have become a useful alternative for the power generation. The power of photovoltaic is nonlinear function of its voltage and current. It is necessary to maintain the operation point of photovoltaic in order to get the maximum power point (MPP) in various solar intensity. Fuzzy logic controller has advantage in handling non-linear system. Maximum power ...

متن کامل

A Minimal-Cost Inherent-Feedback Approach for Low-Power MRF-Based Logic Gates

The Markov random field (MRF) theory has been accepted as a highly effective framework for designing noise-tolerant nanometer digital VLSI circuits. In MRF-based design, proper feedback lines are used to control noise and keep the circuits in their valid states. However, this methodology has encountered two major problems that have limited the application of highly noise immune MRF-based circui...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • SIAM J. Comput.

دوره 29  شماره 

صفحات  -

تاریخ انتشار 2000