Design and Modelling of Fuzzy and Model Predictive Controllers for STATCOM to enhance Transient Stability of Power System
نویسندگان
چکیده
AbstractIn modern power system, Static Compensator (STATCOM) is used to alleviate the transient stability problem and damping power system oscillations. In this paper different STATCOM control scheme using fuzzy logic controller (FLC) and model predictive controller (MPC) for the Single Machine Infinite Bus (SMIB) system in improving transient stability is simulated using MATLAB/ Simulink in power systems block set. PI, FLC and MPC signals are used to control and exchange the required reactive power among the STATCOM and the power grid. A load disturbance is simulated and the behavior of the system for voltage fluctuations has been studied. Simulation results using ProportionalIntegral (PI) controller, Fuzzy Logic Controller (FLC) and Model Predictive Controller (MPC) have been compared. The effectiveness of the different controllers in damping oscillations and improving power system stability has been discussed. KeywordStatic Synchronous Compensator (STATCOM), PI controller, fuzzy logic controller (FLC), Model Predictive Controller (MPC), Flexible AC Transmission System (FACTS).
منابع مشابه
A PSO-Based Static Synchronous Compensator Controller for Power System Stability Enhancement
In this paper Power system stability enhancement through static synchronous compensator (STATCOM)based controller is investigated. The potential of the STATCOM supplementary controllers to enhance thedynamic stability is evaluated. The design problem of STATCOM based damping controller is formulatedas an optimization problem according to the eigenvalue based objective function that is solved by...
متن کاملFast Transient Hybrid Neuro Fuzzy Controller for STATCOM During Unbalanced Voltage Sags
A static synchronous compensator (STATCOM) is generally used to regulate voltage and improve transient stability in transmission and distribution networks. This is achieved by controlling reactive power exchange between STATCOM and the grid. Unbalanced sags are the most common type of voltage sags in distribution networks. A static synchronous compensator (STATCOM) is generally used to maintain...
متن کاملImproving the Transient Stability of Power Systems Using STATCOM and Controlling it by Honey Bee Mating Optimization Algorithm
In this study, a new method for designing the damping controller was proposed to improve the transient power system stability in a single machine network connected to an infinite bus. The STATCOM controller problem in a wide area of the system function was considered as an optimization problem with multi-purpose objective function. Also, the Honey Bee Mating Optimization Algorithm was used to d...
متن کاملImprovement of Power System Transient Stability Using Fuzzy Controlled Shunt Facts Device
In this modern world, the electrical power consumption is vast and its power system is complex and faces many challenges due to growing demand and construction of new lines. Transient stability is one of the main system insecurity when large disturbances occur. Here at first conventional shunt facts devices Static VAR Compensator (SVC), Static Synchronous Compensator (STATCOM)are used as an add...
متن کاملUsing Neural Network to Control STATCOM for ImprovingTransient Stability
FACTS technology has considerable applications in power systems, such as; improving the steady stateperformance, damping the power system oscillations, controlling the power flow, and etc. STATCOM is oneof the most important FACTS devices used in the parallel compensation, enhancing transient stability andetc. Since three phase fault is widespread in power systems, in this paper STATCOM is used...
متن کامل