High Temperature Resistant Organic/Inorganic Hybrid Polymers:
نویسندگان
چکیده
Public Reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comment regarding this burden estimates or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188,) Washington, DC 20503. 1. AGENCY USE ONLY ( Leave Blank) 2. REPORT DATE April 18 2007 3. REPORT TYPE AND DATES COVERED July 1
منابع مشابه
Materials for the New Millennium- Synthetic Inorganic, Semi-inorganic, and Organic-inorganic Hybrid Polymers
The properties of mineralogical and covalent inorganic polymers are brieffy described in the introductory part. Glass is an important polymer made up of rings and chains of silicate units which contain negatively charged oxygen atoms neutralized by positive metal ions. Glass and few other mineralogical types of inorganic polymers, like aluminum oxyde, could be fabricated into fibers and used as...
متن کاملConductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE)
In this work, Poly(ethyleneterephthalate) (PET) substrate was treated using KOH solution and was modified using hybrid O-I coating containing PCL )polycaprolactone( as organic phase and TEOS )tetraethoxysilane( as inorganic phase. The coating was prepared through a sol-gel process and applied on the surface by dip coater. Then, electrically conducting polythiophene (PTh) nanoparticles were depo...
متن کاملIntroduction, synthesis procedures, and applications of organic-inorganic hybrid nanoflowers in biosciences
Organic-inorganic hybrid nanoflowers with flower-like morphology are new nanostructures comprising organic and inorganic components. In general, the organic component of hybrid nanoflowers mostly consists of proteins, DNA, RNA, plant extracts, metabolites, and natural polymers; and the inorganic component composes of various metal phosphates, including copper, calcium, manganese, iron, zinc, co...
متن کاملAn overview of organic/inorganic membranes based on sulfonated poly ether ether ketone for application in proton exchange membrane fuel cells
Nowadays, proton exchange membrane fuel cells (PEMFCs) are the most promising green energy conversion devices for portable and stationary applications. Traditionally, these devices were based onperfluoro-sulfonic acid electrolytes membranes, given the commercial name Nafion. Nafion is the mostused electrolyte membrane till now; because of its high electrochemical properties su...
متن کاملSurface chemistry for molecular layer deposition of organic and hybrid organic-inorganic polymers.
The fabrication of many devices in modern technology requires techniques for growing thin films. As devices miniaturize, manufacturers will need to control thin film growth at the atomic level. Because many devices have challenging morphologies, thin films must be able to coat conformally on structures with high aspect ratios. Techniques based on atomic layer deposition (ALD), a special type of...
متن کاملToward High-Performance Organic-Inorganic Hybrid Solar Cells: Bringing Conjugated Polymers and Inorganic Nanocrystals in Close Contact.
Organic-inorganic hybrid solar cells composed of conjugated polymers (CPs) and inorganic nanocrystal (NC) semiconductors have garnered considerable attention as a potential alternative to traditional silicon solar cells due to the capacity of producing high-efficiency solar energy in a cost-effective manner. The combination of advantageous characteristics of CPs and NCs enables the construction...
متن کامل