Tracing the Corrosion Processes of Different Metal-ceramic Dental Crowns by Eis and Sem Investigation
نویسندگان
چکیده
The paper aims on the investigations of corrosion processes of three different porcelain fused to metal dental crowns with CoCrMo frameworks. The three crowns, with different exposed metal surfaces, were investigated using electrochemical impedance spectroscopy (EIS), through 168 hours of experiment. The data were analyzed and the influence of corrosion processes was shown after the crowns were visualized as equivalent electrical circuits. Scanning electron microscopy (SEM) coupled with EDX was used to analyze the crowns surfaces.
منابع مشابه
Preparation of SiO2/ZrO2 ceramic nanocomposite coating on Aluminum alloys as metallic part of the photovoltaic cells and study its corrosion behavior.
Nowadays due to water shortage, the use of air humidity as the sustainable solution has been considered by cities located in coastal zones; especially in warm and humid climate. However, the use of air humidity also has its own problems such as corrosion of metal parts in photovoltaic cells that used for energy supplying and they are often made of Aluminum alloy. Therefore different methods suc...
متن کاملThe Effect of Different Finishing Lines on the Marginal Fitness of Full Contour Zirconia and Glass Ceramic CAD/CAM Crowns (An in-vitro study)
Purpose: The aim of this study was to evaluate the effect of two gingival finishing lines (90° shoulder and deep chamfer) on the marginal fitness of two types of full anatomic all-ceramic crowns; zirconia crowns (Zikonzhan) and glass ceramic crowns (IPS e-max CAD) milled with CAD/CAM system. Materials and Methods: Two dentoform teeth of left maxillary first molar were prepared with chamfer fini...
متن کاملThe evaluation and comparison of marginal adaptation in metal ceramic and all ceramic restorations fabricated by two methods: CAD/CAM and conventional
Introduction: Marginal fit is a key factor for long term clinical success through any dental restorations. Poor marginal adaptation causes cement dissolution. This can lead to dental caries, gingival irritation, periodontal diseases, and finally treatment failure. The aim of this study was measurement and comparison of marginal gap quantities in metal ceramic and all ceramic dental restorations...
متن کاملCAD/CAM-titanium-ceramic single crowns with non-anatomic coping-design. A six-year follow-up study
Objectives Due to the increasing price of gold CAD/CAM titanium-ceramic restorations were developed to give alternative to the established metal-ceramic restorations with a high gold content. Despite the advantages of excellent biocompatibility, high corrosion resistance and appropriate strength titanium has made the casting process difficult caused by the high affinity of molten titanium to in...
متن کاملElectrochemical Investigation of Coconut Oil as Green Corrosion Inhibitor for ST37 Carbon Steel Protection
The corrosion inhibition of ST37 Carbon Steel in 1.0 M HCl by aquatic extract of coconut has been studied as a possible source of green inhibitor using the potentiodynamic polarization and electrochemical impedance spectroscopy techniques. The aquatic extract of coconut have many advantages over classical techniques of sample preparation of plant gums (such as drying and solvent reflux).Pol...
متن کامل