Bounding Theorem in Finite Plasticity with Hardening Effect*
نویسندگان
چکیده
The complementary variational problems for finite plasticity with strainhardening effect are developed in this paper based on the theory of convex analysis. A new lower bound theorem for the load intensity factor, in which the plastic yield condition is relaxed by a complementary plastic superpotential, is proved. A simple illustrative example is worked out.
منابع مشابه
On the Optimum Die Shape in Rod Drawing Process Considering Work-Hardening Effect of Material
The assessment of the influence of the work-hardening of material on the optimum die profile and drawing force in rod drawing process is the main objective of the present paper. The upper bound solution, based on the assumption of perfect plasticity, has been extended to consider the work-hardening of the material during the rod drawing process through curved dies. Analytical results of drawin...
متن کاملOn the optimum die angle in rod drawing process considering strain-hardening effect of material
In this paper, rod drawing process of strain-hardening materials is investigated by analytical, numerical and experimental methods. The classic upper bound solution, based on the assumption of perfect plasticity, has been extended to consider the work-hardening of the material during the drawing process. For a given process conditions and mechanical properties of the rod material, the power ter...
متن کاملThe Effect of Volume Fractions on Hole Stress Concentration in Composite Lamina Subjected to Matrix Plasticity
In this paper, the stress concentration around a hole in the single layer composite materials with long fibers is examined. The single layer has an infinite length, limited with and instant thickness and is loaded by a constant tension force p at infinity. The width of the lamina is considered to be finite and bears a hole as a defect. Due to presence of excessive shear stress in the matrix bay...
متن کاملConstitutive Model for Multi-laminate Induced Anisotropic Double Hardening Elastic-plasticity of Sand
A constitutive multi-laminate based elastic-plastic model developed to be capable of accounting induced anisotropic behavior of granular material such as sand. The fabric feature or grain orientation characteristic effects through medium are considered in a rational way under any complex stress path, including cyclic loading. The salient feature of the developed model is a non-associative on pl...
متن کاملSANISTEEL: Simple Anisotropic Steel Plasticity Model
A simple constitutive model for the inelastic response of steel under monotonic and random cyclic loading conditions is developed within the framework of bounding surface plasticity. The particular feature that distinguishes this model from other similar ones is the ability of the bounding surface formulation to describe in a very simple way the initial “plateau” type of perfectly plastic respo...
متن کامل