Effects of Trace Metals on Particulate Matter Formation in a Diesel Engine: Metal Contents from Ferrocene and Lube Oil
نویسندگان
چکیده
−Diesel particulate matter (DPM) often contains small amounts of metal as a minor component but this metal may contribute to adverse health effects. Knowledge of the mechanism for particle formation as well as the size preference of the trace metals is critical to understanding the potential for health concerns. To achieve this, the size and the composition of each particle should be optimally measured at the same time. Single particle mass spectrometer (SPMS) would be the best tool for this objective. In this paper, we therefore will introduce new findings about the mechanism and distribution of the trace metals in DPM, derived from a study where an SPMS was used to analyze freshly emitted DPM.
منابع مشابه
Diesel Exhaust Particulates Characterization for Heavy Metals
This study was set out to characterize particulate emissions from transportation diesel engine in terms of heavy metals. The exhaust particulates from Mahindra DI engine were collected and analyzed at four different engine operating conditions namely idling, 40%, 70% and full load. It was found that as the load increases from idling to full load, the heavy metal content in particulates graduall...
متن کاملRole of lubrication oil in particulate emissions from a hydrogen-powered internal combustion engine.
Recent studies suggest that trace metals emitted by internal combustion engines are derived mainly from combustion of lubrication oil. This hypothesis was examined by investigation of the formation of particulate matter emitted from an internal combustion engine in the absence of fuel-derived soot. Emissions from a modified CAT 3304 diesel engine fueled with hydrogen gas were characterized. The...
متن کاملCharacteristics of fish oil biodiesel with the impact of diesel fuel addition on a CI engine
The present study focuses on the optimization in the use of non-petroleum fuel derived from waste fish oil fuels, as a replacement for petroleum diesel fuel for compression ignition engine. The study comprises of comparison between results of fish oil biodiesel-diesel blends on a compression ignition engine. Fuel properties such as viscosity, density, heat value of fuel, cetane number and a fla...
متن کاملThe influence of a cerium additive on ultrafine diesel particle emissions and kinetics of oxidation
The influence of a cerium additive on the kinetics of oxidation and size distribution of ultrafine diesel particles was studied using a high-temperature oxidation-tandem differential mobility analysis method over the temperature range 300–700 ◦C. The addition of cerium to the diesel fuel was observed to cause significant changes in numberweighted size distributions, light-off temperature, and k...
متن کاملPalm Oil Methyl Ester and Its Emulsions Effect on Lubricant Performance and Engine Components Wear
The results of an experimental work carried out to evaluate the effect of palm oil methyl esters, also known as palm oil diesel (POD) and its emulsions as alternative fuel on unmodified indirect injection diesel engine's wear and lube oil performance are presented in this paper. Half throttle engine with constant 2500 rpm setting was maintained throughout the wear debris and lube oil analysis s...
متن کامل