Mesoporous calcium–silicon xerogels with mesopore size and pore volume influence hMSC behaviors by load and sustained release of rhBMP-2

نویسندگان

  • Wenhua Song
  • Xiangde Li
  • Jun Qian
  • Guoyu Lv
  • Yonggang Yan
  • Jiacan Su
  • Jie Wei
چکیده

Mesoporous calcium-silicon xerogels with a pore size of 15 nm (MCS-15) and pore volume of 1.43 cm(3)/g were synthesized by using 1,3,5-mesitylene (TMB) as the pore-expanding agent. The MCS-15 exhibited good degradability with the weight loss of 50 wt% after soaking in Tris-HCl solution for 56 days, which was higher than the 30 wt% loss shown by mesoporous calcium-silicon xerogels with a pore size of 4 nm (MCS-4). The pore size and pore volume of MCS-15 had significant influences on load and release of recombinant human bone morphogenetic protein-2 (rhBMP-2). The MCS-15 had a higher capacity to encapsulate a large amount of rhBMP-2; it could adsorb 45 mg/g of rhBMP-2 in phosphate-buffered saline after 24 hours, which was more than twice that with MCS-4 (20 mg/g). Moreover, the MCS-15 system exhibited sustained release of rhBMP-2 as compared with MCS-4 system (showing a burst release). The MCS-15/rhBMP-2 system could promote the proliferation and differentiation of human mesenchymal stem cells, showing good cytocompatibility and bioactivity. The results indicated that MCS-15, with larger mesopore size and higher pore volume, might be a promising carrier for loading and sustained release of rhBMP-2, which could be used as bone repair material with built-in osteoinduction function in bone reconstruction.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sustained release of VH and rhBMP-2 from nanoporous magnesium–zinc–silicon xerogels for osteomyelitis treatment and bone repair

Nanoporous magnesium-zinc-silicon (n-MZS) xerogels with a pore size ∼4 nm, a surface area of 718 cm(2)/g, and a pore volume of 1.24 cm(3)/g were synthesized by a sol-gel method. The n-MZS xerogels had high capacity to load vancomycin hydrochloride (VH) and human bone morphogenetic protein-2 (rhBMP-2), after soaking in phosphate buffered saline (PBS) for 24 hours (1.5 and 0.8 mg/g, respectively)...

متن کامل

Studying Performance of Dubinin-astakhov and Dubinin-raduchkevic Equations to Evaluate Nanopore Volume and Pore Size of MCM-41 Particles (TECHNICAL NOTE)

MCM-41 particles were synthesized using inorganic raw materials and  Cetyltrimethylammonium bromide (CTAB). The textural properties and structure of MCM-41 particles were characterized by XRD, SEM, TEM and N2 adsorption-desorption methods. To study performance of Dubinin-Astakhov and Dubinin-Raduchkevic isotherm models in evaluating mesopore volume and pore size of MCM-41 samples, the mesopore ...

متن کامل

Bimodal mesoporous silicas functionalized with different level and species of the amino groups for adsorption and controlled release of aspirin.

The synthesis of modified bimodal mesoporous materials (BMMs) with a small pore size of around 2.9 nm and a large pore size of about 20 nm has been performed via post-grafting methods. To study the application of functionalized BMMs in drug delivery, loading and releasing profiles using aspirin as model drug were carried out. XRD, SEM, TEM, N2 adsorption, FT-IR, 29Si-NMR, TG and UV-Vis spectros...

متن کامل

Cage-like ordered silica with large mesopore volume synthesized by doubling amount of polymer, adding sodium chloride and lowering acid concentration.

Cage-like ordered mesoporous silica, FDU-1, with about twice the pore volume and a narrower pore size distribution compared with those for previously reported samples was synthesized in a much shorter time by doubling the amount of block copolymer, adding sodium chloride and lowering the acid concentration.

متن کامل

Investigation of Activation Time on Pore Size Distribution of Activated Carbon Determined with Different Methods

Three activated carbons are synthesized in a rotary reactor at different activation times. The adsorption isotherms of the samples are measured The pore size distribution of the samples is determined using combined Saito and Foley method, BJH method. An average potential function has been determined inside the cylindrical pores. The effect of activation time on the pore size distribution sample...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 10  شماره 

صفحات  -

تاریخ انتشار 2015