Life-cycle-assessment of the historical development of air pollution control and energy recovery in waste incineration.
نویسندگان
چکیده
Incineration of municipal solid waste is a debated waste management technology. In some countries it is the main waste management option whereas in other countries it has been disregarded. The main discussion point on waste incineration is the release of air emissions from the combustion of the waste, but also the energy recovery efficiency has a large importance. The historical development of air pollution control in waste incineration was studied through life-cycle-assessment modelling of eight different air pollution control technologies. The results showed a drastic reduction in the release of air emissions and consequently a significant reduction in the potential environmental impacts of waste incineration. Improvements of a factor 0.85-174 were obtained in the different impact potentials as technology developed from no emission control at all, to the best available emission control technologies of today (2010). The importance of efficient energy recovery was studied through seven different combinations of heat and electricity recovery, which were modelled to substitute energy produced from either coal or natural gas. The best air pollution control technology was used at the incinerator. It was found that when substituting coal based energy production total net savings were obtained in both the standard and toxic impact categories. However, if the substituted energy production was based on natural gas, only the most efficient recovery options yielded net savings with respect to the standard impacts. With regards to the toxic impact categories, emissions from the waste incineration process were always larger than those from the avoided energy production based on natural gas. The results shows that the potential environmental impacts from air emissions have decreased drastically during the last 35 years and that these impacts can be partly or fully offset by recovering energy which otherwise should have been produced from fossil fuels like coal or natural gas.
منابع مشابه
Selecting the best options of management of municipal solid waste using life cycle assessment methodology (case study: Noor city)
Background and Objective: one of the major challenges in urban management in human societies is related to the collection, recycling and disposal of solid waste and sewage. Poor waste management causes pollution of water, soil and air. It will have a major impact on public health. The aim of present study was to investigate the current status and select the best options of management of munici...
متن کاملApplication of Life Cycle Assessment for Techno-Economic Evaluation of Rural Solid Waste Management Strategies: Significance of CO2 Emission Control from Waste Management Sector in Abyaneh Village, Isfahan Province
Waste disposal in the current situation, which quantity and variety of waste are increasing, needs not only effective management principles but also depends on environmentally-friendly methods to put as less environmental footprint as possible. This study aims to assess the energy consumption, emission of greenhouse gases and air pollutants which normally produce during various waste management...
متن کاملEnvironmental assessment of alternative strategies for municipal solid waste management by means of life cycle assessment modelling (a case study: Chalus, Iran)
Background and Objective: Due to the increasing trend of municipal solid waste (MSW) production, if a suitable management system is not applied, it will lead to environmental pollution and endanger human health. The aim of this study was to compare different scenarios of waste management in Chalous city with life cycle assessment (LCA) approach and to select the most efficient method in terms o...
متن کاملImpact assessment of waste management options in Singapore.
This paper describes the application of life cycle assessment for evaluating various waste management options in Singapore, a small-island city state. The impact assessment method by SimaPro is carried out for comparing the potential environmental impacts of waste treatment options including landfilling, incineration, recycling, and composting. The inventory data include gases and leachate from...
متن کاملUsing life cycle assessment for municipal solid waste management in Tehran Municipality Region 20
Background: Due to the lack of a proper waste management system, Tehran Municipality Region 20 is facing economic and environmental problems such as the high costs of a disposal system and source pollution. Life cycle assessment (LCA) is a method for collecting and evaluating the inputs, outputs, and potential environmental impacts of a product system throughout its life cycle. The current stud...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Waste management
دوره 30 7 شماره
صفحات -
تاریخ انتشار 2010