Ag nanoparticle-deposited TiO2 nanotube arrays for electrodes of Dye-sensitized solar cells
نویسندگان
چکیده
ABSTRACT Dye-sensitized solar cells composed of a photoanode of Ag nanoparticle (NP)-deposited TiO2 nanotube (TNT) arrays were fabricated. The TNT arrays were prepared by anodizing Ti films on fluorine-doped tin oxide (FTO)-coated glass substrates. Efficient charge transportation through the ordered nanostructure of TNT arrays should be carried out compared to conventional particulate TiO2 electrodes. However, it has been a big challenge to grow TNT arrays on FTO glass substrates with the lengths needed for sufficient light-harvesting (tens of micrometers). In this work, we deposited Ag nanoparticles (NPs) on the wall of TNT arrays to enhance light-harvesting property. Dye-sensitized solar cells with these Ag NP-deposited TNT arrays yielded a higher power conversion efficiency (2.03 %) than those without Ag NPs (1.39 %). PACS CODES 06.60.Ei Sample preparation, 81.05.Bx Metals, Semimetals, Alloys, 81.07.De Nanotubes.
منابع مشابه
High Efficient Transparent TiO2 Nanotube Dye-Sensitized Solar Cells: Adhesion of TiO2 Nanotube Membrane to FTO by Two Different Methods
In order to fabricate transparent TiO2 nanotube dye-sensitized solar cells, anodically growth nanotube membranes are detached from Ti substrate by a re-anodization method. The membranes are transferred on FTO glass by two different methods. At the first one, 100mM Ti-isopropoxide is used to make TiO2 nanoparticles for adhering TiO2 nanotube membranes to FTO and ...
متن کاملDye-sensitized TiO2 nanotube solar cells: rational structural and surface engineering on TiO2 nanotubes.
Owing to well-defined structural parameters and enhanced electronic properties, highly ordered TiO(2) nanotube arrays have been employed to substitute TiO(2) nanoparticles for use in dye-sensitized solar cells. To further improve the performance of dye-sensitized TiO(2) nanotube solar cells, efforts have been directed toward the optimization of TiO(2) photoanodes, dyes, electrolytes, and co...
متن کاملDesign of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols
We explore electro-catalytic properties of a system consisting of platinum and palladium nanoparticles dispersed over a nanotubular self-organized TiO2 matrix. These electrodes prepared by electroess and microemulsion of palladium and palladium nanoparticles on to TiO2 nanotubes, respectively. Titanium oxide nanotubes were fabricated by anodizing titanium foil in ethylene glycol (EG) fluoride-c...
متن کاملDye-Sensitized TiO2 Nanotube Solar Cells with Markedly Enhanced Performance via Rational Surface Engineering
Highly ordered anodic TiO2 nanotube arrays fabricated by electrochemical anodization were sensitized with ruthenium dye N-719 to yield dye-sensitized TiO2 nanotube solar cells. Rational surface treatments on photoanode TiO2 nanotubes markedly improved the device performance. With TiCl4 treatment, in conjunction with oxygen plasma exposure under optimized conditions, dye-sensitized TiO2 nanotube...
متن کاملHigh-efficiency dye-sensitized solar cells based on robust and both-end-open TiO2 nanotube membranes
In the present work, dye-sensitized solar cells (DSSCs) were fabricated by incorporating transparent electrodes of ordered free-standing TiO2 nanotube (TNT) arrays with both ends open transferred onto fluorine-doped tin oxide (FTO) conductive glass. The high-quality TiO2 membranes used here were obtained by a self-detaching technique, with the superiorities of facile but reliable procedures. Af...
متن کامل