Saleh, Kamel and Sumner, M. (2016) Sensorless control of fault tolerant PMSM drives in case of single-phase open circuit fault. In: 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 22-24 June 2016, Anacapri, Italy

نویسندگان

  • Kamel Saleh
  • Mark Sumner
چکیده

This paper introduces a new method to track the saliency of a PMSM motor fed by a four-leg inverter in case of a single phase open circuit fault through measuring the dynamic current response of the motor line currents due the IGBT switching actions. In the case of a single phase open circuit fault, a fault-tolerant control strategy that includes taking appropriate actions to control the two remaining healthy currents, resulting in minor system performance degradation. The new strategy introduced in this paper includes software modifications only to the saliency tracking algorithm used in healthy mode to make it applicable to the reconfigured converter in the presence of a fault. The new method uses only the fundamental PWM waveform (i.e there is no modification to the operation of the four-leg inverter) similar to the fundamental PWM method proposed for a three-leg inverter. Simulation results are provided to verify effectiveness of the proposed strategy of saliency tracking of a PMSM motor driven by fault tolerant four-phase inverter over a wide speed ranges under the case of a single phase open circuit fault. Keywords—Sensorless; four leg inverter; single phase open circuit; SVPWM.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sensorless Model Predictive Force Control with a Novel Weight Coefficients for 3-Phase 4-Switch Inverter Fed Linear Induction Motor Drives

The sensorless model predictive force control (SMPFC) is a strong method for controlling the drives of three-phase 4(6)-switch inverter linear induction motors. This kind of inverter can be employed for fault tolerant control in order to solve the problem of open/short circuit in 6-switch inverters (B6). This paper proposed a method for the SMPFC of a linear induction motor (LIM) with a 4-switc...

متن کامل

Fault Diagnosis and Fault-Tolerant SVPWM Technique of Six-phase Converter under Open-Switch Fault

In this paper, a new open-switch fault diagnosis method is proposed for the six-phase AC-DC converter based on the difference between the phase current and the corresponding reference using an adaptive threshold. The open-switch faults are detected without any additional equipment and complicated calculations, since the proposed fault detection method is integrated with the controller required ...

متن کامل

Review on VSI Switch Fault Tolerant Control Systems for Electric Vehicle Drivetrains

Electric Vehicles (EVs) are an effective solution for reducing greenhouse gas emissions to the atmosphere. Safety is the most crucial issue in the automotive industry and any fault in the EV drivetrain may results in a fatal accident. This paper discusses the dynamic performance of EVs under drivetrain Voltage Source Inverter (VSI) switch faults and presents the suitable Fault Diagnosis Algorit...

متن کامل

Torque Control of Brushless Direct Current Motor Drives Using Single Current Sensor with High Reliability

Due to the simple structure, high torque density, low maintenance, and high efficiency, brushless direct current (BLDC) motors are widely used in automation and industrial applications. A control strategy based on single current sensor is proposed for a four-switch three-phase BLDC motor system to lower cost and improve reliability. The whole working process of the BLDC motor is divided into si...

متن کامل

Adaptive and intelligent control of permanent magnet synchronous motor (PMSM) using a combination of fuzzy logic and gray wolf algorithm under fault condition

Nowadays, permanent magnet synchronous motors have been widely used in industry due to the elimination of excitation losses, longer life and higher efficiency. Errors in engine and drive systems are unavoidable during operation. Therefore, a suitable scenario should be considered for when these systems fail. If the necessary predictions and control algorithms are not considered for the error co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017