Iron-doped BaTiO3: Influence of iron on physical properties
نویسندگان
چکیده
Barium Titanate BaTiO3 is known for both its electric and magnetic properties. The synthesis and characterization of iron doped barium titanate; BaTi1-xFexO3 (x= 0.005, 0.01, 0.015) was investigated with a view to understand its structural, magnetic and electrical properties. A finest possible sample of Iron doped micro particles of BaTiO3 (BTO) with possible tetragonal structure via a solid-state route was prepared. Prepared samples of BaTi1-xFexO3 (Fe-BTO) were structural characterized by X-ray diffraction (XRD) then XRD data fitted by Rietveld refinement. Fourier Transform Infrared Spectroscopy were use to determine the Ti-O bond length position according to increment in Iron on Titanium site. The dielectric constant measurements of the samples were carried out at 1 MHz. Vibrating Sample Magnetometer (VSM) measurements revealed the magnetic nature of Iron doped BaTiO3. Magnetic Moment verses Temperature plot took at 1Tesla and Magnetic Moment verses Magnetic field plot took at low temperature (10K). Ferroelectric hysteresis loop traced at the electric field in-between -8 to +8 (KV/cm). Details of the preparation technique, experimental results, data analysis, and the interpretation will be presented.
منابع مشابه
Dextran grafted nickel-doped superparamagnetic iron oxide nanoparticles: Electrochemical synthesis and characterization
In this paper, polymer grafted nickel-doped iron oxide nanoparticles are fabricated via an easy, one-step and fast electrochemical procedure. In the deposition experiments, iron(II) chloride hexahydrate, iron(III) nitrate nonahydrate, nickel chloride hexahydrate, and dextran were used as the bath composition. Dextran grafted nickel-doped iron oxides (DEX/Ni-SPIOs) were synthesized with applying...
متن کاملNonvolatile Hologram Storage in BaTiO 3
A key obstacle to the development of high-capacity three-dimensional information mass storage systems using photorefractive crystals is that readout of holograms stored in the conventional manner is destructive. Thus hologram fixing in these materials is important if practical systems are to be built. High-temperature (801200C) photorefractive grating writing results for a variety of pure and d...
متن کاملDFT Study of N-hydroxyurea Adsorption Behavior onto Pristine and Iron-doped Single-walled Carbon Nanotube
The interactions between N-hydroxyurea (NHU) as anticancer drug and SWCNTs (pure and Fe-doped) were investigated with density functional theory. In this study, large long-range corrected CAM-B3LYP and B3LYP were employed to investigate the stability of the different NHU-CNT and NHU/Fe-CNT complexes in the gas phase and solution (water). The presence of an iron atom would create suitable space o...
متن کاملSynthesis of Fe-Doped Titanite and Quasi-Titanite Structures and Studying the Effect of Doping on Physical and Optical Properties
Fe-doped titanite (TiCaSiO5) and quasi-titanite (Ti0.5CaSi1.5O5) compositions were synthesized by the ceramic method. For each structure, two samples with 0.1 mol% and 0.2 mol% Fe were used. The synthesized samples were homogenized using a planetary ball mill in 2-ethylhexyl stearate solvent and then printed on the ceramic with screen printing system....
متن کاملThe effect of increasing of iron concentration on the physical properties of zinc-iron ferrite nanoparticles
In this research, zinc-iron ferrite nanoparticles were synthesized by thermal treatment method. The presence of crystalline phases by X-ray diffraction (XRD) was determined by X-ray diffraction (XRD), which confirmed the presence of crystalline phases in all nanoparticles. The particle size and morphology of the nanoparticles were obtained using Field Emission Scanning Electron Microscopy (FESE...
متن کامل