Identification of Positioning Skill Based on Feedforward/Feedback Switched Dynamical Model
نویسندگان
چکیده
To realize the harmonious cooperation with the operator, the man-machine cooperative system must be designed so as to accommodate with the characteristics of the operator’s skill. One of the important considerations in the skill analysis is to investigate the switching mechanism underlying the skill dynamics. On the other hand, the combination of the feedforward and feedback schemes has been proved to work successfully in the modeling of human skill. In this paper, a new stochastic switched skill model for the sliding task, wherein a minimum jerk motion and feedback schemes are embedded in the different discrete states, is proposed. Then, the parameter estimation algorithm for the proposed switched skill model is derived. Finally, some advantages and applications of the proposed model are discussed. key words: hybrid system, minimum hand jerk motion, human behavior model
منابع مشابه
3-RPS Parallel Manipulator Dynamical Modelling and Control Based on SMC and FL Methods
In this paper, a dynamical model-based SMC (Sliding Mode Control) is proposed fortrajectory tracking of a 3-RPS (Revolute, Prismatic, Spherical) parallel manipulator. With ignoring smallinertial effects of all legs and joints compared with those of the end-effector of 3-RPS, the dynamical model ofthe manipulator is developed based on Lagrange method. By removing the unknown Lagrange multipliers...
متن کاملDisturbance rejection by acceleration feedforward: Application to dynamic positioning
This paper addresses environmental disturbance rejection in dynamic systems by means of acceleration feedforward. A feedforward structure calculates the environmental force and magnitude by comparing the filtered acceleration measurement with the acceleration due to actuation and known forces. Direct compensation of the environment by feedforward will alleviate the position and velocity feedbac...
متن کاملFriction Identification and Compensation on Nanometer Scale
This work concerns the modelling and experimental verification of the highly nonlinear friction behavior in positioning on the nanometer scale. The main goal of this work is to adjust and identify a simple dynamic friction model which allows a model-based estimation of the friction force in combination with the system inertia against displacement. Experiments in the pre-sliding and sliding fric...
متن کاملThe Electromyographic Feedback and Feedforward Activity of Selected Lower Extremity Muscles During Toe-in Landing in Female Athletes
Background: Positioning the legs in performing spike technique significantly contributes to the development and prevention of lower limb injuries. The present study aimed to evaluate and compare the feedback and feedforward activaties of selected lower limb muscles during triple jump spike with and without toe-in landing in female volleyball players. Methods: In this controlled-laboratory stud...
متن کاملTime Delay and Data Dropout Compensation in Networked Control Systems Using Extended Kalman Filter
In networked control systems, time delay and data dropout can degrade the performance of the control system and even destabilize the system. In the present paper, the Extended Kalman filter is employed to compensate the effects of time delay and data dropout in feedforward and feedback paths of networked control systems. In the proposed method, the extended Kalman filter is used as an observer ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Transactions
دوره 92-A شماره
صفحات -
تاریخ انتشار 2009