Motion Control for Autonomous
نویسنده
چکیده
Maneuvers of a nonholonomic vehicle in a structured dynamic environment are considered. The paper focuses on motion generation and control methods to autonomously perform lane following/changing, parallel parking and returning to traac maneuvers. Lane fol-lowing/changing involves the tracking of a nominal trajectory in the traac lane, and the generation and tracking of local lane-changing trajectories, for instance, for obstacle avoidance. The key idea of the control approach for the parallel parking and returning to traac maneuvers is to perform a sequence of controlled motions using sensor data from the car servo-systems and range measurements of the local environment. Appropriate steering and velocity controls are computed in real time and executed to accomplish the planned maneuvers. The methods developed are tested on an automatic electric vehicle.
منابع مشابه
Adaptive Robust Control for Trajectory Tracking of Autonomous underwater Vehicles on Horizontal Plane
This manuscript addresses trajectory tracking problem of autonomous underwater vehicles (AUVs) on the horizontal plane. Adaptive sliding mode control is employed in order to achieve a robust behavior against some uncertainty and ocean current disturbances, assuming that disturbance and its derivative are bounded by unknown boundary levels. The proposed approach is based on a dual layer adaptive...
متن کاملRobot Motion Vision Part II: Implementation
The idea of Fixation introduced a direct method for general recovery of shape and motion from images without using either feature correspondence or optical flow [1,2]. There are some parameters which have important effects on the performance of fixation method. However, the theory of fixation does not say anything about the autonomous and correct choice of those parameters. This paper presents ...
متن کاملAn automated time and hand motion analysis based on planar motion capture extended to a virtual environment
In the context of industrial engineering, the predetermined time systems (PTS) play an important role in workplaces because inefficiencies are found in assembly processes that require manual manipulations. In this study, an approach is proposed with the aim to analyze time and motions in a manual process using a capture motion system embedded to a virtual environment. Capture motion system trac...
متن کاملDesign and Experimental Evaluation of integrated orientation estimation algorithm Autonomous Underwater Vehicle Based on Indirect Complementary Filter
This paper aims is to design an integrated navigation system constituted by low-cost inertial sensors to estimate the orientation of an Autonomous Underwater Vehicle (AUV) during all phases of under water and surface missions. The proposed approach relied on global positioning system, inertial measurement unit (accelerometer & rate gyro), magnetometer and complementary filter technique. Complem...
متن کاملOPTIMIZED FUZZY CONTROL DESIGN OF AN AUTONOMOUS UNDERWATER VEHICLE
In this study, the roll, yaw and depth fuzzy control of an Au- tonomous Underwater Vehicle (AUV) are addressed. Yaw and roll angles are regulated only using their errors and rates, but due to the complexity of depth dynamic channel, additional pitch rate quantity is used to improve the depth loop performance. The discussed AUV has four aps at the rear of the vehicle as actuators. Two rule bases...
متن کاملMotion generation and control for parking an autonomous vehicle
Practical aspects of motion generation and control for parking a nonholonomic autonomous vehicle are considered. An iterative algorithm for the parallel parking maneuver is proposed. It is based on ultra-sonic range data processing. To control the steering angle and longitudinal velocity of the vehicle during the parking maneuver, sinusoidal reference functions are used. To prevent collisions, ...
متن کامل