Analysis of Reset Control Systems Consisting of a FORE and Second - Order Loop
نویسندگان
چکیده
Reset controllers consist of two parts a linear compensator and a reset element. The linear compensator is designed, in the usual ways, to meet all closed-loop performance speci cations while relaxing the overshoot constraint. Then, the reset element is chosen to meet this remaining step-response speci cation. In this paper, we consider the case when such linear compensation results in a second-order (loop) transfer function and where a rst-order reset element (FORE) is employed. We analyze the closed-loop reset control system addressing performance issues such as stability, steadystate response and transient performance. This material is based upon work supported by the National Science Foundation under Grant No.CMS9800612. MIE Department, University of Massachusetts, Amherst, MA 01003; [email protected]. Now with Motorola, Inc. MIE Department, University of Massachusetts, Amherst, MA 01003; [email protected]. ECE Department, University of Massachusetts, Amherst, MA 01003; [email protected].
منابع مشابه
High Speed Delay-Locked Loop for Multiple Clock Phase Generation
In this paper, a high speed delay-locked loop (DLL) architecture ispresented which can be employed in high frequency applications. In order to design the new architecture, a new mixed structure is presented for phase detector (PD) and charge pump (CP) which canbe triggered by double edges of the input signals. In addition, the blind zone is removed due to the elimination of reset signal. Theref...
متن کاملA Novel Approach to Designing of Chattering-Free Sliding-Mode Control in Second-Order Discrete-Time Systems
In this paper, a chattering-free sliding-mode control is mainly proposed in a second-order discrete-time system. For achieving this purpose, firstly, a suitable control law would be derived by using the discrete-time Lyapunov stability theory and the sliding-mode concept. Then the input constraint is taken into account as a saturation function in the proposed control law. In order to guarantee ...
متن کاملModeling of Jitter Characteristics for the Second Order Bang-Bang CDR
Bang-Bang clock and data recovery (BBCDR) circuits are hard nonlinear systems due to the nonlinearity introduced by the binary phase detector (BPD). The specification of the CDR frequency response is determined by jitter tolerance and jitter transfer. In this paper, jitter transfer and jitter tolerance of the second-order BBCDR are characterized by formulating the time domain waveforms. As a re...
متن کاملDelay-independent stability via reset loops
An important aspect that must be taken into account in many control applications is the presence of delay in the loop, which can be the source of performance degradation or even instability (see, for example, [16], [17] and references therein). A control architecture that received much attention in recent years is that of reset control. Reset control systems can be represented by means of diffe...
متن کاملNonlinear Reset Integrator Control Design: Application to the Active Suspension Control of Vehicles
We present an unexampled reset integrator control design based on the Clegg integrator system. Using an appropriate mathematical model of our Clegg integrator controller, stability proof of the closed-loop system applied to the vibration control problem of a second-order system is shown without invoking hybrid system theory. Furthermore, we illustrate the applicability of our controller, from t...
متن کامل