Melt volume flow rate and melt flow rate of kenaf fibre reinforced Floreon/magnesium hydroxide biocomposites
نویسندگان
چکیده
A study of the melt volume flow rate (MVR) and the melt flow rate (MFR) of kenaf fibre (KF) reinforced Floreon (FLO) and magnesium hydroxide (MH) biocomposites under different temperatures (160-180 °C) and weight loadings (2.16, 5, 10 kg) is presented in this paper. FLO has the lowest values of MFR and MVR. The increment of the melt flow properties (MVR and MFR) has been found for KF or MH insertion due to the hydrolytic degradation of the polylactic acid in FLO. Deterioration of the entanglement density at high temperature, shear thinning and wall slip velocity were the possible causes for the higher melt flow properties. Increasing the KF loadings caused the higher melt flow properties while the higher MH contents created stronger bonding for higher macromolecular chain flow resistance, hence lower melt flow properties were recorded. However, the complicated melt flow behaviour of the KF reinforced FLO/MH biocomposites was found in this study. The high probability of KF-KF and KF-MH collisions was expected and there were more collisions for higher fibre and filler loading causing lower melt flow properties.
منابع مشابه
Characterization of Laccase-Treated Kenaf Fibre Reinforced Recycled Polypropylene Composites
Raw and laccase-treated kenaf fibre (KF) were used individually to reinforce recycled polypropylene (RPP) using extrusion and injection moulding. Laccase was used to modify the surface of the fibre to improve the compatibility between fibre and matrix. Enzyme concentration and soaking time were considered as the treatment parameters. Maleic anhydride grafted polypropylene (MAPP) was used with a...
متن کاملBiodegradable PLA-Kenaf Fibre Biocomposite for Cleaner Environment
This project was undertaken to study the biodegradability of PLA-KF biocomposite in different conditions; soil burial and immersion in water. The samples were buried in soil for 40 days to investigate the degradability of biocomposites. As for water absorption tests, the samples were immersed in three different types of water which were river water (pH 6), tap water (pH 7) and sea water (pH 7.5...
متن کاملAnalysis of flow development in centrifugal atomization: Part I. Film thickness of a fully spreading melt
Centrifugal atomization of metal melts is a cost-effective process for powder production and spray deposition. The properties of the as-produced powder and deposit are determined primarily by the characteristics of the atomized droplets, which in turn are largely dependent on the flow development of the melt on the atomizer. This paper develops a model for analysing the flow development of a fu...
متن کاملImpact, thermal and biodegradation properties of high impact polystyrene/corn starch blends processed via melt extrusion
High impact polystyrene (HIPS)/corn starch blends were prepared in presence of glycerol as a plasticizer via melt extrusion process by a twin-screw extruder. The novelty of this work is first, because of the use of pre-gelatinized corn starch as modified one and second, the procedure of making blends by extruder which makes it ease of access and also industrially possible. The blends were then ...
متن کاملIn Situ Formation and Refinement of Mg2Si in Fiber-Reinforced AZ91D Magnesium Alloy*
In order to obtain a lightweight material having an excellent high-temperature strength, Mg alloy composites reinforced with short alumina fibers and in situ Mg2Si particles were fabricated. The composites were fabricated by pressureless infiltration of the Mg alloy melt into the preform consisting of the fibers and attached Si particles. The volume fraction of Si particles in the preform, the ...
متن کامل