Automatic Optical Crack Tracking for Double Cantilever Beam Specimens
نویسندگان
چکیده
1 Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 2 Beckman Institute for Advanced Science and Technology, University of Illinois at Urbana-Champaign, Urbana, IL 3 Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 4 Department of Aerospace Engineering, University of Illinois at Urbana-Champaign, Urbana, IL
منابع مشابه
Energy Release Rate Analysis for Adhesive and Laminate Double Cantilever Beam Spec- imens Emphasizing the Effect of Residual Stresses
The mode I energy release rate, including the effect of residual stresses, was evaluated for both adhesive and laminate double cantilever beam specimens. The energy release rate can be partitioned into a mechanical term and a residual stress term in beam theory. The beamtheory mechanical term is not very accurate, but can be corrected by a slight modification to a previous correction factor. Th...
متن کاملStress intensity factors as the fracture parameters for delamination crack growth in composite laminates
A ``mutual integral'' approach is used to calculate the mixed-mode stress intensity factors for a free-edge delamination crack in a laminate under tensile loading conditions. This ``mutual integral'' approach, for generalized plane strain conditions, is based on the application of the path-independent J integral to a linear combination of three solutions: one, the problem of the laminate to be ...
متن کاملStrain Measurements within Fibreboard. Part III: Analyzing the Process Zone at the Crack Tip of Medium Density Fiberboards (MDF) Double Cantilever I-Beam Specimens
This paper is the third part of a study dealing with the mechanical and fracture mechanical characterization of Medium Density Fiberboards (MDF). In the first part, an analysis of internal bond strength testing was performed and in the second part MDF was analyzed by means of the wedge splitting experiment; this part deals with the double cantilever I beam test, which is designed for measuring ...
متن کاملFatigue and Fracture of Bovine Dentin
In this paper, the fatigue and fracture properties of bovine dentin are evaluated using in vitro experimental analyses. Double cantilever beam (DCB) specimens were prepared from bovine maxillary molars and subjected to zeroto-tension cyclic loads. The fatigue crack growth rate was evaluated as a function of the dentin tubule orientation using the Paris law. Wedge-loaded DCB specimens were also ...
متن کاملModal Testing and Finite Element Analysis of Crack Effects on Turbine Blades
The study of vibration response of a turbine blade helps to detect the crack presence in the blade which alters its dynamic characteristics. The change is characterized by changes in the modal parameters associated with natural frequencies. In this paper, study of vibration response is made for turbine blade in the presence of a crack like defect. Turbine blade is initially assumed as a cantile...
متن کامل