Novel Mn1.5Co1.5O4 spinel cathodes for intermediate temperature solid oxide fuel cells.
نویسندگان
چکیده
Mn(1.5)Co(1.5)O(4) spinel oxide as a cathode or one component of a composite cathode presents no visible reaction with an Y(2)O(3)-stabilized ZrO(2) electrolyte. The low electrode polarization resistances and good performance compared with traditional Sr-doped LaMnO(3)-YSZ composite cathodes imply promising application for the next generation of intermediate-temperature solid oxide fuel cells.
منابع مشابه
La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کاملNovel glass-ceramic composition as sealant for SOFCs
This work deals with the design, the characterization and testing of a novel glass-ceramic to be used as sealant for planar solid oxide fuel cells and its compatibility with Mn1.5Co1.5O4 coated Crofer22APU. Thermal, sintering and crystallization behaviour and thermo mechanical properties of the sealant are reviewed and discussed, indicating therefore that these compositions can be deposited at ...
متن کاملCopper Manganese Spinel Coating on a Ferritic Stainless Steel for SOFC Application
Nowadays, Because of daily reduction of fossil fuels and environmental problems caused by using them, Fuel Cells attracted a major attention as clean and efficient way of generating electrical power. Solid Oxide Fuel Cells (SOFCs) have many advantages to other fuel cell types. High working temperature of SOFCs caused serious challenges including high oxidation rate of interconnects, Spallation ...
متن کاملNew Rhenium-Doped SrCo1−xRexO3−δ Perovskites Performing as Cathodes in Solid Oxide Fuel Cells
In the aim to stabilize novel three-dimensional perovskite oxides based upon SrCoO3-δ, we have designed and prepared SrCo1-xRexO3-δ phases (x = 0.05 and 0.10), successfully avoiding the competitive hexagonal 2H polytypes. Their performance as cathode materials in intermediate-temperature solid oxide fuel cells (IT-SOFC) has been investigated. The characterization of these oxides included X-ray ...
متن کاملElectrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects
In the present study, Mn - Cr spinel powder was synthesized through a solid state reaction. In the next step, the electrophoretic deposition (EPD) method was used to apply the MnCr2O4 spinel, as an oxidation-resistant layer, on SUS 430 stainless steel in a potential of 300 V/cm. The coated and uncoated samples were then pre-sintered in air at 900 °C for 3 h followed by cyclic oxidation at 800 °...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 47 8 شماره
صفحات -
تاریخ انتشار 2011