Investigation of multiple cracking in glass/epoxy 2D woven composites by vibrothermography

نویسندگان

  • G. Bai
  • B. Lamboul
  • J. M. Roche
  • S. Baste
چکیده

An experimental study about the application of vibrothermography for the investigation of multiple microcracking in woven composites is here reported. The material is first damaged during tensile loading tests in order to have samples that present increasingly damaged states. The goal of the study is to apply vibrothermography to compare the sensitivity of their heating behaviour (global and local) with the crack density. A correlation between the heating and the loss of a mechanical property of the material (in this case the Young modulus) estimated with the tensile loading tests is also highlighted.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An experimental investigation of novel hybrid epoxy/glass fibers nanocomposite reinforced with nanoclay with enhanced properties for low velocity impact test

The application of nanoparticles in order to enhance the composites properties has been recently attracted many researchers' attentions. To increase the mechanical and physical properties of the composites, the nanoparticles have no significant effect on the weight and nanostructure of composites. One of the well-known nanoparticles is the Nanoclay (NC) that have been widely used in industries ...

متن کامل

Transverse Crack Detection in 3D Angle Interlock Glass Fibre Composites Using Acoustic Emission

In addition to manufacturing cost and production rates, damage resistance has become a major issue for the composites industry. Three-dimensional (3D) woven composites have superior through-thickness properties compared to two-dimensional (2D) laminates, for example, improved impact damage resistance, high interlaminar fracture toughness and reduced notch sensitivity. The performance of 3D wove...

متن کامل

Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles

Adhesive bonding technology is being used in a variety of modern industries, including the automotive, aerospace, maritime, construction, defense and so on. On the other side, polymeric nano - composites attracted both academic and industrial interests in the past decades. The scope of this paper is experimental investigation on the effects of the addition of Alpha-alumina nanoparticles to the ...

متن کامل

Modeling Cyclic Fatigue Hysteresis Loops of 2D Woven Ceramic Matrix Composites at Elevated Temperatures in Steam

In this paper, the cyclic fatigue hysteresis loops of 2D woven SiC/SiC ceramic matrix composites (CMCs) at elevated temperatures in steam have been investigated. The interface slip between fibers and the matrix existing in matrix cracking modes 3 and 5, in which matrix cracking and interface debonding occurred in longitudinal yarns, is considered as the major reason for hysteresis loops of 2D w...

متن کامل

Resistance to Stress Corrosion Cracking of Unidirectional Glass/Polymer Composites Based on Low and High Seed ECR- glass Fibers for High Voltage Composite Insulator Applications

Stress corrosion experiments were performed on unidirectional ECR-glass/polymer composites with the modified polyester, epoxy and vinyl ester resins for the use in high voltage composite insulator applications. Two types of ECR-glass fibers with low and high seed counts were investigated. The stress corrosion tests were performed in nitric acid under four point bending conditions and the resist...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016